Quote from: Ostriker on January 18, 2024, 05:58:15 PM
went stock on this frame + customs logos,

currently in productions, all the plans were according to listing and checked twice with them before giving my confirmation

nice! post some photos of the frame if you can. when you receive.

Now wait n see when it arrives...

Nice frame !

Looks super similar to my waltly. I wonder if they are all made in the same factory... 

how did it all go?

Quote from: avocadobike on April 22, 2024, 06:41:22 AM
how did it all go?

i have brake left to bleed, otherwise nothing to say.

welds are nice, frame is to geometry i asked for.

cant wait to try it out

picture is before ive passed all hydraulic lines

that looks really nice! what headset/bearing did you use? i'm currently getting my Ti built and mechanic is struggling to find a headset

Quote from: avocadobike on April 24, 2024, 09:20:34 PM
that looks really nice! what headset/bearing did you use? i'm currently getting my Ti built and mechanic is struggling to find a headset

The stock that was sent by the seller is this one

https://www.necoparts.com/en/product/H322MP.html

Bearing size are 40x52x8

annnnnnnd done!

Cant wait to good weather to try it out

Your post convinced me to get one myself! Have you gotten a chance to ride your new build?

Quote from: dren on June 11, 2024, 04:32:09 PM
Your post convinced me to get one myself! Have you gotten a chance to ride your new build?

rode it dozen times, getting a 2nd wheelset for more road (50mm with 32mm tires) and selling my rim brake, def my favorite bike

One legitime question, not trying to criticize. Why did you ask for internal routing frame if you where planning to use a standard /  redshift stem?

I also have an internal routed titanium frame and I actually regret having made it internal, but I am not sure if routing it out at the bearing cups is the way to go, as more crap is likely entering the bearing areas through the cable openings, and you still get the harder maintenance of the bearings because of the cables goung through them

Quote from: mirphak on June 12, 2024, 10:55:07 AM
One legitime question, not trying to criticize. Why did you ask for internal routing frame if you where planning to use a standard /  redshift stem?

I also have an internal routed titanium frame and I actually regret having made it internal, but I am not sure if routing it out at the bearing cups is the way to go, as more crap is likely entering the bearing areas through the cable openings, and you still get the harder maintenance of the bearings because of the cables goung through them

Why do you regret an internal routed frame? Did you go for an internal routing stem/integrated handlebar? I don't have the bearings on hand but if they're sealed bearings I can't see it being too big of a problem, might wear the bearings slightly faster but I can't see it being significant.

Quote from: mirphak on June 12, 2024, 10:55:07 AM
One legitime question, not trying to criticize. Why did you ask for internal routing frame if you where planning to use a standard /  redshift stem?

I also have an internal routed titanium frame and I actually regret having made it internal, but I am not sure if routing it out at the bearing cups is the way to go, as more crap is likely entering the bearing areas through the cable openings, and you still get the harder maintenance of the bearings because of the cables goung through them

i liked the top routing rather than the frame side, cleaner look.

As for the stem, i had one in stock already, i might try full integrated or semi one day but i dont trust carbon handlebars

I ordered a frame and had issues with the derailleur and rear thruaxle threads on the frame, I showed the seller and they are sending me a replacement frame very quickly too. If anyone was wondering how their service was.

Quote from: dren on August 10, 2024, 07:53:24 PM
I ordered a frame and had issues with the derailleur and rear thruaxle threads on the frame, I showed the seller and they are sending me a replacement frame very quickly too. If anyone was wondering how their service was.

atleast thats good service

mine still flawless