Quote from: TidyDinosaur on December 06, 2024, 09:51:31 AM
That Onirii One pro looks extremely similar to the New Spcycle R088, but with a different fork and double the price.
I'm 99% sure it's the same frame at a healthy markup.

That looks like the same frame with different fork, titanium bottle screws and direct mount hanger (most likely UDH). SPCycle might be running a slightly wider fork to fit 32c tires and they also claim EPS molding.

Frame arrived today, be ready for pics and weights

Quote from: c.etzo on December 27, 2024, 06:46:59 AM
Frame arrived today, be ready for pics and weights

how long did it take from order to delivery?

Quote from: shan on December 27, 2024, 09:01:59 AM
how long did it take from order to delivery?

20 days
Here a collage of weights
Frame Is without hardware in size 54 paintless but with clear coat

first issue with headset.
the top bearing sits 4 mm below the frame border and with the compression ring of my handlebar i can't preload.
so i need a C-ring of 8 mm or more i think


the frame looks very good, brake holes seems faced and also the bb.

did you contact Ican directly, ask them whether this is correct ? or maybe they have some solution to fix that?

I wrote go Crystal to ask the size of their compression ring
Mine from handlebar of tt-x38 Is 5mm in height, so very low

Could you take a photo of bearings in the frame? So you assume that they gove the wrong ring? They give some spacers eith the frameset?

You can probably buy some shims to get the headset to compress. I feel like DUB crank spacers could work.

Quote from: Mariuszuzd on December 29, 2024, 05:01:44 PM
Could you take a photo of bearings in the frame? So you assume that they gove the wrong ring? They give some spacers eith the frameset?

i've bought the frame without their handlebar, so they send me only the 2 bearings without ring, the ring is from my tt-x38 headset

here the pics and for comparison how it sits on TT-X38

i've ordered this set of spacers - the ring seems to be 10mm and may solve the problem
https://it.aliexpress.com/item/1005005927486056.html?spm=a2g0o.order_list.order_list_main.4.5f103696v2pG2O&gatewayAdapt=glo2ita

Quote from: c.etzo on December 30, 2024, 02:51:10 AM
i've bought the frame without their handlebar, so they send me only the 2 bearings without ring, the ring is from my tt-x38 headset

here the pics and for comparison how it sits on TT-X38

hold it...
how come your ttx38 top bearing sits so further inside with clear few mm of top seat wall, while my ttx38 bearing sits flush to the bearing seat. 

is your top bearing a shorter height vs the bottom headset bearing (mine supplied both same bearing)

Quote from: ejump0 on December 30, 2024, 03:34:48 AM
hold it...
how come your ttx38 top bearing sits so further inside with clear few mm of top seat wall, while my ttx38 bearing sits flush to the bearing seat. 

is your top bearing a shorter height vs the bottom headset bearing (mine supplied both same bearing)

Wait, the collage photo Is the Ican fl1

Quote from: c.etzo on December 30, 2024, 03:37:08 AM
Wait, the collage photo Is the Ican fl1

i must be trippin when i was seeing the pics

it seems like the fl1 headtube bearing seat were built anticipating the super thicc fsa acr style c-ring.

while stacking 1-2mm spacers may do the trick, i can see that having proper c-ring might be better under the dustcap as the ring width is wider to support the dustcap flat in place

my ICR c-ring+topbearing vs tantan c-ring+topbearing.
the ICR one is thicker indeed

Crystal sent me a photo of ican c-ring and Is 9 mm