Author Topic: FM1001 / FM1156 - 135mm frame  (Read 116852 times)

Jotegr

Re: FM1001 / FM1156 - 135mm frame
« Reply #390 on: January 04, 2023, 07:20:41 PM »
I actually don't think there's a 1.5-1.5 integrated angleset available at all. The only integrated angleset I can think of is the 9.8 one and it's not going to do the 1.5 upper cup.

helmat

Re: FM1001 / FM1156 - 135mm frame
« Reply #391 on: January 18, 2023, 11:20:07 AM »
 My frames arrived today after only 13 days on the road, really like the paint job and the quality of the frame. Looks and feels very sturdy. My XL frame comes in at 3kg, incl. axles and shock placeholder. A bit heavier than I had hoped, but still fine.

Can't wait to build it, but first I'm off to work until Saturday. Also waiting for the rims to arrive and I still have to make a tire decision. Fork has to be rebuild to 140mm and MegNeg installed on the damper. But I also have a CFR707 waiting to be finished, I guess I'll do that one first.
« Last Edit: January 18, 2023, 11:24:28 AM by helmat »

endo.alley

Re: FM1001 / FM1156 - 135mm frame
« Reply #392 on: January 19, 2023, 01:47:29 PM »
I actually don't think there's a 1.5-1.5 integrated angleset available at all. The only integrated angleset I can think of is the 9.8 one and it's not going to do the 1.5 upper cup.

Maybe custom 9point8 Slack-R setup using two bottom cups.

shield

Re: FM1001 / FM1156 - 135mm frame
« Reply #393 on: February 02, 2023, 01:26:55 AM »
Is there anybody with information about the bearing dimensions for the FM1001?

Thanks.
Greetings

brunev

Re: FM1001 / FM1156 - 135mm frame
« Reply #394 on: February 02, 2023, 02:27:47 AM »
Hey everyone, wanted to re-visit the topic of bearings for this frame. I have been able to identify all the bearings used on this frame. Below are the bearings/quantity

Rocker arm pivot/main chain stay pivot:
F6902-EA - x4. This is a flanged bearing

Seat stay/Chain stay pivots:
F6901 - x8. This is a flanged bearing

Lower shock mount:
6801 - x2

As of right now Enduro carries the f6902-EA and the 6801. Currently they do not carry the F6901. The good news is I have exchanged some emails with Enduro, and it looks like they will be adding the F6901 to the catalog. No ETA but sounds like they will have the standard version and the MAX version.

Neb

Re: FM1001 / FM1156 - 135mm frame
« Reply #395 on: February 12, 2023, 02:51:44 PM »
Does anyone have any of the pivot bolt dimensions? I managed to round out one of the bolts by over tightening it, its in place now so no real rush, but at some point I'm going to need to drill it out and replace it. I think it was the drive side Chainstay attachment bolt onto the main pivot.

I think an M6 countersunk bolt from memory, however I've no idea on the length?

Cheers

bossman302

Re: FM1001 / FM1156 - 135mm frame
« Reply #396 on: February 12, 2023, 03:51:54 PM »
M6-1.00 is what I used when I accidently broke the washer/cap thingy.

Freda

Re: FM1001 / FM1156 - 135mm frame
« Reply #397 on: February 24, 2023, 04:55:37 AM »
Here is something if you want to think about the suspension a bit more:

https://insanityofgravity.blogspot.com/2023/02/18-suspension-setup-ausfuhrliches.html

Some german might be good to know as well(or google translate)! :D

spokemon

Re: FM1001 / FM1156 - 135mm frame
« Reply #398 on: February 24, 2023, 03:58:58 PM »
does anybody have measurements for max seatpost insert for size S
thanks

gido

Re: FM1001 / FM1156 - 135mm frame
« Reply #399 on: February 24, 2023, 06:38:45 PM »
My frames arrived today after only 13 days on the road, really like the paint job and the quality of the frame. Looks and feels very sturdy. My XL frame comes in at 3kg, incl. axles and shock placeholder. A bit heavier than I had hoped, but still fine.

 How tall are you Helmat? I am 191cm, want to order but numbers look small to me.


helmat

Re: FM1001 / FM1156 - 135mm frame
« Reply #400 on: February 25, 2023, 01:19:44 AM »
How tall are you Helmat? I am 191cm, want to order but numbers look small to me.

I'm 1.87cm with an 88cm inseam. I'm finished building but unfortunately I haven't been out on the bike yet due to a foot injury...
But from sitting on the bike at home it doesn't feel that small too me. My previous bike was a 2020 Trek Top Fuel XL that fit me really well and I'd say the 1001 feels about the same from a sizing perspective.
I'll upload some pics of my build soon.

gido

Re: FM1001 / FM1156 - 135mm frame
« Reply #401 on: February 25, 2023, 04:44:11 AM »
Tnx Helmat, please follow up with after ride size feeling report. I kindly ask other tall riders for sizing input, i would like to order FM1001 or FM 1002. I am 191 cm tall with 90 cm inseam.

helmat

Re: FM1001 / FM1156 - 135mm frame
« Reply #402 on: March 17, 2023, 03:24:10 AM »
Does anyone have some numbers regarding shock pressures, does this frame need lower pressures? I've set up my suspension yesterday and my shock pressure kinda feels low, I'm running a RockShox Deluxe Ultimate with Megneg (said to increase required pressure by about 20%) and for 30% sag with my 85kg rider weight I put only 180psi into the shock. Does that sound right? Not that I made a mistake during the Megneg installation

Waldo

Re: FM1001 / FM1156 - 135mm frame
« Reply #403 on: March 17, 2023, 12:31:00 PM »
Hello, size suggestion for 1,68 cm and 77 cm inseam?

bossman302

Re: FM1001 / FM1156 - 135mm frame
« Reply #404 on: March 24, 2023, 11:32:20 AM »
Does anyone have some numbers regarding shock pressures, does this frame need lower pressures? I've set up my suspension yesterday and my shock pressure kinda feels low, I'm running a RockShox Deluxe Ultimate with Megneg (said to increase required pressure by about 20%) and for 30% sag with my 85kg rider weight I put only 180psi into the shock. Does that sound right? Not that I made a mistake during the Megneg installation

No, I run 185/190 psi on my Super Deluxe Ultimate. I will be adding the megneg (maybe this weekend). Make sure you didn't cover any of the hole in the new can with the orings or red bands. Curious to see what happens after the install.