Does anyone change bolts in his/hers Hygge for titanium ones and have specification what to order?
I have done that recently as the bolt on the seat post wedge and the bolts holding the FD mount were badly rusted after several wet rides on salty roads. I ordered from Wanyfa on AliX in gold colour to spice up an BOB frame.
The dimensions are:
Seat clamp M6x35 for the rear bolt M6x40 for the front (stock both are 35mm length and the front bolt was only holding on 2-3 threads which i did not like at all)
Seat post wedge M6x18
FD hanger M4x12 countersunk bolts 3 pieces, and this is the same bolt size that holds the RD hanger.
The bottle cage mouthing bolts did not suffer rust at all, i presume because they are stainless steel?? but will change them also. They are M5x15
The headset compression bolt is M5x30mm
I did not measure the stem bolts (because they did not rust) but should be M5x16 and also i will need nuts that go on the opposite side of the stem. there are complete sets of stem bolt and nut on ali.
Hope this helps.
