TideaceBike New mold Road Frame FM-CR068 groupbuy

[Mariuszuzd]

Anyone also weight the frame in the size L. Looking for some swap of Elves Falath Evo which is very heavy in size 59 - 1360 g. I saw that L size is also quite heavy. What regarding the fork and seatpost?

[Uberflo]

Bike is ready, sits on 7,8 kg including pedals and bottle cages. The build was straight forward except for the handlebar. I am little bit disappointed from the speeder cycling as it was very tight on the fork (had to sand it) and sharp edges inside with kind of carbon filament.

A quick photo https://imgur.com/a/aIFT6qs

[BeR]

Bike is ready, sits on 7,8 kg including pedals and bottle cages. The build was straight forward except for the handlebar. I am little bit disappointed from the speeder cycling as it was very tight on the fork (had to sand it) and sharp edges inside with kind of carbon filament.

A quick photo https://imgur.com/a/aIFT6qs

How is the ride ?

[Uberflo]

Will report when the weather conditions allow

[Uberflo]

Here are better pictures

https://imgur.com/a/r6vQg0T

[Timuk]

That looks great.  What rotor sizes are you running?  Are you using Red E1 calipers?

[Uberflo]

160 mm SwissStop Catalyst Race with the E1 calipers

[Icyseanfitz]

Here are better pictures

https://imgur.com/a/r6vQg0T

Looks really good imo

[Uberflo]

Last issue was the large gap under the top cap. So I bought a universal o ring seal and cut a fitting part. I will have to sand it down a little bit as the seal is 2 mm thick as large as the gap.

https://imgur.com/a/vw9Zg6K