Thoughts on wheels from Carbon Speed? I didn't find many results using the search feature. I think @Serge_K has bought from them.
My interest is in those 65mm deep 34ext 26int wheels. Probably overkill for the road, but I do own a set of wheels from No6 and find them to be wildly comfortable with 30c tires. Stretches them to 32/33mm. No tangible loss in speed. But of course this hasn't been scientifically tested.
https://www.xmcarbonspeed.com/Productinfo.asp?f=1649
Correct, i bought 5 sets. we got pretty much the first rims out of the 34mm wide mould for the rear, and 32mm wide or so in the front. 55mm depth front, 58mm depth rear.
Front DC2855 rim 24H T800 UD matt no holes in rim bed, Rear DC93258 rim 24H T800 UD matt no holes in rim bed, Custom hubs made in Taiwan 6 pawl 24/24H 6 bolts for 100*12/142*12 with Shimano 11S driver; Pillar wing 20 spokes with pillar nipples
Very happy with them. I greased the thru axle on the rear wheel on mine because for some reason i dont understand, sometimes it would make a noise. Since greasing it, no noise. I usually dont bother greasing thru axles.
The freehub body is easy to remove, i packed extra grease to silence them.
1 front wheel was a bit of true (my friend noticed, i hadnt), so i spent 5min truing it back a bit.
Beyond that, i'm 8k km into my set, and have no complaints. Probably another 4k km across the other sets, no complaints either. My set has gone through gravel, dirt, very high speeds, very high braking into sketchy harpins, forest roads, wet: it's seen plenty of real world conditions.
The complaints we have on this batch of bikes is with L-TWOO, not the frames, cockpits or wheels. Luckily, everything carbon has been flawless. The rear derailleurs... less so...
