Author Topic: BXT 24" build  (Read 5094 times)

jefflinde

Re: BXT 24" build
« Reply #15 on: September 12, 2024, 07:58:36 AM »
It's childs play on 15 year old reba dual airs. The two I bought are about 120mm, but have a spacer to reduce it to 100mm. I 3d printer another spacer to shrink them to 80mm forks. Took $2 and 1 hour.

no way,  so you 3d printed a shorter spacer?  or is it a longer spacer?  would you be willing to make another and how much would you charge?  i was thinking it needed a whole new airshaft like the 29er rebas require.  could i

Chris948

Re: BXT 24" build
« Reply #16 on: September 12, 2024, 09:25:51 AM »
no way,  so you 3d printed a shorter spacer?  or is it a longer spacer?  would you be willing to make another and how much would you charge?  i was thinking it needed a whole new airshaft like the 29er rebas require.  could i

If you look at the pic, the stock hard rubber spacer is on the left, that shortens the fork 20mm. I added the middle spacer, that reduced the fork another 20mm.

I mean I could help you, if your air side is identical, no problem. You could save time and money and have a local library or maker space print one. I used PETG but I doubt it matters much.

These reba dual airs are pretty sweet. After reducing the length for a 24" bike, you can either shorten or remove the spacer, which I did so it's a 120mm fork for my kids 26" bike.
« Last Edit: September 12, 2024, 10:04:13 AM by Chris948 »

Chris948

Re: BXT 24" build
« Reply #17 on: September 12, 2024, 09:27:04 AM »
I never played with spacers but doesn’t that just affect the travel on the compressed side of the stroke, acting like a stop? What I was thinking was reducing the stroke length so that both lower and uppers could be shorter, to minimize the overall length and allowed a lower front end

It reduces the overall length. Rockshox sold the spacers years ago, it's a documented thing.

Ludo

Re: BXT 24" build
« Reply #18 on: September 12, 2024, 12:20:59 PM »
That’s a great, I didn’t realize that! Opens up things nicely then, off to find a good 26” fork then

Ludo

Re: BXT 24" build
« Reply #19 on: September 12, 2024, 04:50:51 PM »
Can the same be done on more modern 26 reba like the SL?

Chris948

Re: BXT 24" build
« Reply #20 on: September 12, 2024, 07:32:18 PM »
Can the same be done on more modern 26 reba like the SL?

I have no clue. This was one clue a found a few years ago trying to understand. https://www.mtbr.com/threads/changing-travel-on-older-rockshox-reba-29-dual-air-fork.1075241/

MartinCZ

Re: BXT 24" build
« Reply #21 on: November 07, 2024, 03:32:22 PM »
I am also considering this frame from BXT but with carbon fork. I do not think that my daughter needs a suspension fork for her style of riding and it adds weight too. But it seems that nobody produces 24er thru axle carbon fork, they have just standard QR version. The only one I have seen is on WOOM off5. Has somebody of you came across any 24er fork for thru axle?

About the length of cranks and fitting in general I found lot of inspiration on hupcc.com. They have completely different approach and prefer 28" wheels even for small frame sizes. So another option for a kid's bike (and an alternative to HUP) could be getting Chinese TARMAC SL8 clone or DOGMA F clone in size 44 (43). HUP suggest 44 size for 138+ cm body height. And the geometry is almost the same. Starting with flat handlebar and 26er wheels (if they fit) would be better for us. Standard open mould frames usually start with size 49 and it is too big.

Ludo

Re: BXT 24" build
« Reply #22 on: November 17, 2024, 08:19:07 AM »
Not sure if you went ahead but I am in the process of ordering one for my son, through carbomania on Ali, great contact, a bit cheaper than BXT official. Still undecided between black gloss and bright blue; they will supply sticker free, I will apply my own after.
Hardest part so far is finding wheels. So few options for 24in thru axles that don’t cost much. Was originally going for aluminum but may move to carbon as the price delta is not much and better hub choices

jefflinde

Re: BXT 24" build
« Reply #23 on: November 17, 2024, 03:10:46 PM »
Not sure if you went ahead but I am in the process of ordering one for my son, through carbomania on Ali, great contact, a bit cheaper than BXT official. Still undecided between black gloss and bright blue; they will supply sticker free, I will apply my own after.
Hardest part so far is finding wheels. So few options for 24in thru axles that don’t cost much. Was originally going for aluminum but may move to carbon as the price delta is not much and better hub choices

For wheels i built my own.  like you found, not many options out there.  I ordered the Stans Crest in 24H and then the Novatec 411/412 hubs.  what are you finding for carbon rims?  i was not able to find anything under the 160-180$ range per rim.   

Ludo

Re: BXT 24" build
« Reply #24 on: November 17, 2024, 05:39:22 PM »
Bitranz has one at 150

I just found this on AliExpress: $189.00 | 24er 520 38mm 30mm Width Carbon Rim 25mm Deep 24" Tubeless Sleddog Dog Racing Wheel BMX Folding Bike Freestyle 20 21 24 28 32 36
https://a.aliexpress.com/_mqTOTdh
« Last Edit: November 17, 2024, 05:48:19 PM by Ludo »

jefflinde

Re: BXT 24" build
« Reply #25 on: November 17, 2024, 05:50:42 PM »
oh i think i saw those.  the Stan's Crests were lighter by just a bit.  but those were nice and wide.   

Ludo

Re: BXT 24" build
« Reply #26 on: November 19, 2024, 10:02:22 AM »
Well I think I will end up with aluminum wheels, unlabeled Pasak’s from carbomania, the frame supplier. Gave me a good deal on a demo set with tires.

I’ll start a built thread to not pollute yours