Stem -12 to -17 degrees - integrated cable routing - 120 mm length

[WhityWhite]

Stem -12 to -17 degrees - 120 mm length - integrated cable routing

anyone have any tips?

So far I've only found the Specialized S-Works Tarmac SL7 31.8 stem and this one: https://www.sq-lab.com/produkte/vorbauten/sqlab-vorbau-812-r.html

both ambitious prices for a stem...
And in my opinion the S-Works is only partially integrated...

[Sakizashi]

It looks like you can finally buy the new FSA SMR II stem. It is a -10, but if you run it for internal routing, there is quite a bit of drop at the bar clamp because of the design.  I suspect this stem will result in a position lower than the -17 degree option from SQ lab.

Unfortunately, stems aren't dimensioned to reflect eventual bar height as stack clamping height and drop at the bar clamp can be hard to find. I expect to pick one of these up in the next few weeks, as soon as I can get one from a source other than BikeInn in the 130mm length.

It's a decent price and available in the 120mm size here: https://www.gambacicli.com/en/fsa-ns-smr-ii-10-road-stem.html

The Specialized Sworks Tarmac -12 stem is lighter, and I can confirm that at the 130mm length, the bar position is equal, height wise, to a 130mm -17 Kalloy Uno.

[kubackje]

I was looking for one early this year and ended up with deda Vinci.Great looking stem.

[WhityWhite]

I was looking for one early this year and ended up with deda Vinci.Great looking stem.

I also like the da Vinci stem - above all it looks very clean and allows me an even lower position.

Instead of a Vinci handlebar or handlebars with a DRC system, I think you could also use any other suitable handlebar that has an opening in the middle of the stem, because they say something about DCR compatibility...?
Or am I seeing this wrong?

[kubackje]

I also like the da Vinci stem - above all it looks very clean and allows me an even lower position.

Instead of a Vinci handlebar or handlebars with a DRC system, I think you could also use any other suitable handlebar that has an opening in the middle of the stem, because they say something about DCR compatibility...?
Or am I seeing this wrong?

You can use any bar with internal routing. I use a flared aero gravel bars from AliExpress and those are the best bars I've ever had

[patliean1]

You can use any bar with internal routing. I use a flared aero gravel bars from AliExpress and those are the best bars I've ever had

Now you KNOW you gonna have to stop gatekeeping and share the AliExpress link to those bars. Ironically, I think I know which bars those are 

[dumbmachine]

Those bars look very interesting. Do they flex under load?
Can you share the link to those?

[WhityWhite]

You can use any bar with internal routing. I use a flared aero gravel bars from AliExpress and those are the best bars I've ever had

i assume that the deda vinci components on aliexpress are fakes... right?

https://de.aliexpress.com/item/1005003642344064.html?spm=a2g0o.productlist.main.1.1fd1miXkmiXkn8&algo_pvid=ec1743e6-2db6-4833-8d73-142521c4e2a7&algo_exp_id=ec1743e6-2db6-4833-8d73-142521c4e2a7-0&pdp_npi=4%40dis%21EUR%2159.72%2144.19%21%21%2161.16%2145.26%21%40211b6c1717326994818761630eaa31%2112000033304145071%21sea%21DE%214627672901%21X&curPageLogUid=gBEZbocbfz8p&utparam-url=scene%3Asearch%7Cquery_from%3A

They cost just half as much as those from reputable dealers ...

[ejump0]

i assume that the deda vinci components on aliexpress are fakes... right?

https://de.aliexpress.com/item/1005003642344064.html?spm=a2g0o.productlist.main.1.1fd1miXkmiXkn8&algo_pvid=ec1743e6-2db6-4833-8d73-142521c4e2a7&algo_exp_id=ec1743e6-2db6-4833-8d73-142521c4e2a7-0&pdp_npi=4%40dis%21EUR%2159.72%2144.19%21%21%2161.16%2145.26%21%40211b6c1717326994818761630eaa31%2112000033304145071%21sea%21DE%214627672901%21X&curPageLogUid=gBEZbocbfz8p&utparam-url=scene%3Asearch%7Cquery_from%3A

They cost just half as much as those from reputable dealers ...

man..
how come i didnt stumbled upon this combo when i was searching???
looks beautiful.

i ended getting Mosso ST08 stem + kocevlo 150g acr bar for my upcoming x38 build