Author Topic: Tiny hole in new frame, normal? (Read 1980 times)

samroy92 · « **on:** February 07, 2018, 04:24:25 PM »

Hi guys I just received the Workswell 062 carbon frame, and just about the bottom bracket there is a tiny pinhole:

https://imgur.com/a/0BQ4A

Is this normal?

bxcc · « **Reply #1 on:** February 07, 2018, 05:33:59 PM »

Yes it's for running a front derailleur cable. The hole looks weird though. Any chance you could take a clearer picture?

Jonathan · « **Reply #2 on:** February 08, 2018, 01:17:20 AM »

I think your information is very useful for me.

carbonazza · « **Reply #3 on:** February 08, 2018, 02:40:52 AM »

If you do not use a front derailleur, plug this hole with silicone or a rubber plug to limit water ingress.

samroy92 · « **Reply #4 on:** February 12, 2018, 12:50:38 PM »

Yes it's for running a front derailleur cable. The hole looks weird though. Any chance you could take a clearer picture?

You were right, after putting the bike together I found out it was for the front derailleur cable. Thanks a bunch!

samroy92 · « **Reply #5 on:** February 12, 2018, 12:51:08 PM »

If you do not use a front derailleur, plug this hole with silicone or a rubber plug to limit water ingress.

Good tip, yes I decided to go with single speed in the front, thanks!

News: