« previous next »
Pages: [1] 2 3

Author Topic: 256 build by Jake  (Read 14224 times)

Jake

256 build by Jake
« on: July 13, 2014, 06:27:24 AM »
Yesterday I received my IP-256.
This is without the axle and I replaced the bolts for the bottleholders  and the front mech by alluminum ones.

Logged


Sussed.

Re: 256 build by Jake
« Reply #1 on: July 13, 2014, 08:04:01 AM »
Looking forward to seeing you build it up !  8) 8)
Logged

MTB2223

Re: 256 build by Jake
« Reply #2 on: July 13, 2014, 08:58:30 AM »
What size frame did you get ?
Logged

jonxmack

Re: 256 build by Jake
« Reply #3 on: July 13, 2014, 10:01:58 AM »
Awesome, watching this thread!
Logged
Handmade cycle accessories and luggage - http://www.thebreakaway.cc/

Jake

Re: 256 build by Jake
« Reply #4 on: July 13, 2014, 10:39:44 AM »
Logged

Jake

Re: 256 build by Jake
« Reply #5 on: July 13, 2014, 11:20:56 AM »
Rigid carbon fork FK-052 for 15mm thru axle, also from Iplay
I have also got a RS Reba but it is more than 1000 gr heavier....



Strange hole:


Lots of space for Schwalbe Nobby Nic 2.35 on a  30mm ID rim !! did they send me a fork meant for a fat bike?


Does this ring from the Neco Headset really have to go all the way down here?
It just doesn't fit or am I missing something?
Logged

Vipassana

Re: 256 build by Jake
« Reply #6 on: July 13, 2014, 11:21:10 AM »
Man, the IP-256's are rolling in fast. One of the three I ordered should be here this week.  We're going to have a lot of neat builds in the coming month.
Logged

Jake

Re: 256 build by Jake
« Reply #7 on: July 13, 2014, 12:42:34 PM »
Neco headset:
Bottom:


Top:


Cap and "starnut':


Where should I put these two rings?
Logged

jonxmack

Re: 256 build by Jake
« Reply #8 on: July 13, 2014, 03:26:11 PM »
They go between the top bearing and the bearing cover to allow the headset to spin smoothly if the bearing cover rubs on the frame
Logged
Handmade cycle accessories and luggage - http://www.thebreakaway.cc/

RS VR6

Re: 256 build by Jake
« Reply #9 on: July 15, 2014, 11:38:50 PM »
Yes...the head set race needs to sit flush in the crown of the fork.
Logged

Vipassana

Re: 256 build by Jake
« Reply #10 on: July 23, 2014, 07:35:37 PM »
How is this build going?
Logged

Jake

Re: 256 build by Jake
« Reply #11 on: July 30, 2014, 03:45:36 AM »
Quote from: Vipassana on July 23, 2014, 07:35:37 PM
How is this build going?
I am already riding it...
Parts list with Reba:
 

With rigid fork:
Logged

MTB2223

Re: 256 build by Jake
« Reply #12 on: July 30, 2014, 03:59:40 AM »
That are awesome weights !!!

Under the magical 9 kg with a suspension fork in a 1x10 setup !

I hoping to come close below the 10kg (2x10 setup), but I don't think I can make it ...
Logged

Jake

Re: 256 build by Jake
« Reply #13 on: July 30, 2014, 04:30:15 AM »
Actual weight is 8960 gr..

Some things I want to change:

Chainstay protector: I have a piece of tube now but I am searching for protective tape
Axles: Extralite has lighter ones but they are expensive
Dropper seatpost
Logged

Vipassana

Re: 256 build by Jake
« Reply #14 on: July 30, 2014, 04:44:30 AM »
How does the frame ride?
Logged
Pages: [1] 2 3
« previous next »