TanTan - Seraph FM121 XC 120mm Full Suspension 2024 model

[gas0fa]

Specialf. What handlebar do you have mounted?

Thank you

[Specialf.]

Specialf. What handlebar do you have mounted?

Thank you

first syncros frayser (the one in the photo) now I put the syncros hixon with rise 25mm always aliex

[michael_pappas]

 I finally got my replacement bolt after requesting it via WhatsApp and can report that it cleared up the clicking noise and play in the shock mount. The bike rips and is super fun. We'll see what other issues arise though.

[bangacan]

Here's my bike finally fully assembled:
Frame: Large
Rear Shock: SideLuxe Ultimate
Fork: Fox 34 140mm
Seatpost: PNW Loam 150mm
Dropper Remote: Ztto
Saddle: Ryet 3d printed
Handlebar: ToSeek
Stem: ToSeek 70mm
Grips: ESI Chunky
Brakes: Ztto M1 X4/X2
Wheelset Ryet 33x30mm ratchet
Rotors: Sram Centerline
BB: Shimano XT
Crankset: Senicx FM2
Chainring: Zrace 32t
Pedals: XT
Cassette: Speedao 10-50t
Shifter: Sram GX Eagle
Rear Derailleur: Sram XO Eagle

I haven't weighed it while fully assembled but it should be around 12.5kg based on individual part weight.

Ride quality is pretty good. As previously state, the bearings are definitely garbage so those will need to be changed out shortly.

Why dud you finally decide on the Sid luxe? I’m either getting that or the Fox Float. I can get either one for around $200. Not sure what shock is best for this frame. I e asked tantan this question but doubt they will give me the same thought out answer that a more mainstream company would. I could be wrong.

[michael_pappas]

I went with the sid because it was a good deal. I got it used for like $120 and it's tuned for a Transition Spur which isn't ideal but so far it's been fine.