Author Topic: DT 240EXP hub clones Goldix, Venfort  (Read 44868 times)

Rufusz

Re: DT 240EXP hub clones Goldix, Venfort
« Reply #75 on: March 21, 2023, 08:04:17 AM »
...

There are sales at Ali for the moments with very tempting prices for the Novatec hubs.
Could you link some? The spare parts though is valid also.

lukwy

Re: DT 240EXP hub clones Goldix, Venfort
« Reply #76 on: March 21, 2023, 08:10:12 AM »
I know, I asked them for 36t ratchet.
FS: Carbonda FM936, XT/SLX 1x12, 2.4
Gravel: TanTan GR045, GRX820/105 2x12, 700x35c

TidyDinosaur

Re: DT 240EXP hub clones Goldix, Venfort
« Reply #77 on: March 21, 2023, 11:19:48 AM »
Could you link some? The spare parts though is valid also.

Not exactly what you are looking for, but this seller is cheap...
US $35.39  55%OFF | Novatec D791SB-CL D792SB-CL Center Lock Disc Brake MTB Hubs Thru axle 100x12 142x12MM 24 Holes Road Bicycle Hubs ABG FREEHUB 11S
https://a.aliexpress.com/_mstavsq

Bajker

Re: DT 240EXP hub clones Goldix, Venfort
« Reply #78 on: March 21, 2023, 12:45:35 PM »
Thanks but  the ZTTO M1 thread is full of ratchet failures... Maybe the 36T is safer I have no idea.

The 6-bolt brake version has a pawl system with 72 clicks if you don't want ratchet. They have this one as well for j-bend spokes, but its heavier https://www.aliexpress.com/item/1005003541415410.html

kbernstein

Re: DT 240EXP hub clones Goldix, Venfort
« Reply #79 on: April 28, 2023, 07:08:46 AM »
Does anyone have the Yuan An RD13 hubs on a wheelset? I was quoted for a pretty good price last year for 2 wheelsets but eventually cheaped out on local 2nd hand DT350 wheels
Here is their comparison chart


The full quote was 910USD for 2 carbon wheelsets with their hubs and pillar spokes
« Last Edit: April 28, 2023, 07:11:03 AM by kbernstein »

zxcvbnmjm

Re: DT 240EXP hub clones Goldix, Venfort
« Reply #80 on: June 19, 2023, 08:55:02 AM »
Does anyone know any chinese brands that make 20f/24r centrelock hubsets?

ultreia

Re: DT 240EXP hub clones Goldix, Venfort
« Reply #81 on: August 25, 2023, 01:45:04 AM »
Any boost MTB hubs recommendation? I would like ratchet and light. I found the Venfort and Goldix M180. Any other similar with better weight?

Re: DT 240EXP hub clones Goldix, Venfort
« Reply #82 on: August 25, 2023, 11:16:48 PM »
Where do you guys get your bearings for the novatec wheels?

Particularly

Novatec D412SB-CL: 15267
Novatec D411SB-CL: 6803
Novatec A291SB-SL: 689
Novatec F482SB-SL: 6802 and 15267


TidyDinosaur

Re: DT 240EXP hub clones Goldix, Venfort
« Reply #83 on: August 26, 2023, 12:48:13 PM »
Where do you guys get your bearings for the novatec wheels?

Particularly

Novatec D412SB-CL: 15267
Novatec D411SB-CL: 6803
Novatec A291SB-SL: 689
Novatec F482SB-SL: 6802 and 15267

I buy most of my bearings here:

https://kandebearingsshop.aliexpress.com/store/3862082?spm=a2g0o.store_pc_home.pcShopHead_11492976.0
https://fushi.aliexpress.com/store/511615?spm=a2g0o.store_pc_promotion.pcShopHead_6005667.0

St0mpB0x

Re: DT 240EXP hub clones Goldix, Venfort
« Reply #84 on: August 27, 2023, 12:18:50 AM »
Does anyone know any chinese brands that make 20f/24r centrelock hubsets?

I'm assuming for road hub spacing?

jannmayer

Re: DT 240EXP hub clones Goldix, Venfort
« Reply #85 on: August 27, 2023, 10:55:11 AM »
Any boost MTB hubs recommendation? I would like ratchet and light. I found the Venfort and Goldix M180. Any other similar with better weight?

I built up a set of wheels with Goldix 240 hubs (36T) and they've held up well for about 400 miles so far. I'm about 95 kg with gear and like cranking up super steep stuff in my 30/51 gear, so they can handle the torque pretty well.

The bearings still seem fine but I will probably order a replacement set soon so that I have them if needed.

zxcvbnmjm

Re: DT 240EXP hub clones Goldix, Venfort
« Reply #86 on: August 27, 2023, 11:19:22 PM »
I'm assuming for road hub spacing?

Yup! Oops I shouldve specified in my original comment


alex.tomazov

Re: DT 240EXP hub clones Goldix, Venfort
« Reply #88 on: September 17, 2023, 10:37:00 AM »
Hello everyone, I want to share my experience of using the GOLDIX 240 EXP hub. As soon as I assembled the wheel, on the first ride the ratchet slipped under load, various lubricants didt help, and in the end, after 100 km the ratchet broke.

TidyDinosaur

Re: DT 240EXP hub clones Goldix, Venfort
« Reply #89 on: September 17, 2023, 12:08:29 PM »
Hello everyone, I want to share my experience of using the GOLDIX 240 EXP hub. As soon as I assembled the wheel, on the first ride the ratchet slipped under load, various lubricants didt help, and in the end, after 100 km the ratchet broke.

That seems to be very common with these hubs...