Author Topic: Spcycle New Mold G056 Carbon Gravel Frame  (Read 36490 times)

Ludo

Re: Spcycle New Mold G056 Carbon Gravel Frame
« Reply #150 on: October 17, 2024, 04:56:00 AM »
Looking at the diffferent build I see that some bolt the derrailleur direct to UDH mount and others have an extender in between that shift the derailleur back a little. What are the benefits of doing so?

Ultramic

Re: Spcycle New Mold G056 Carbon Gravel Frame
« Reply #151 on: October 17, 2024, 04:11:33 PM »
I think UDH is SRAM and direct mount (ie the one with the extension) is Shimano ?? Consensus is that Shimano will ultimately move to UDH so it becomes a truely universal standard.

Ludo

Re: Spcycle New Mold G056 Carbon Gravel Frame
« Reply #152 on: October 17, 2024, 05:20:28 PM »
Ah ok, i see

fhold

Re: Spcycle New Mold G056 Carbon Gravel Frame
« Reply #153 on: October 18, 2024, 03:42:36 AM »
Some better photos of the "final build" - although I'm planning to overhaul the drivetrain a bit - adopting a 38t oval offset chainring and a 11-50 cassette - both in transit.
I also ordered this frame from surprised store and I'm waiting for the delivery. I only get silver screws from them. Where did you get the black ones?

c.etzo

Re: Spcycle New Mold G056 Carbon Gravel Frame
« Reply #154 on: October 18, 2024, 03:52:35 AM »
I also ordered this frame from surprised store and I'm waiting for the delivery. I only get silver screws from them. Where did you get the black ones?
https://it.aliexpress.com/item/1005005070119421.html?spm=a2g0o.order_list.order_list_main.81.4e6c36963nerJf&gatewayAdapt=glo2ita

M5 x 10 mm flat head, worked for my frame

fhold

Re: Spcycle New Mold G056 Carbon Gravel Frame
« Reply #155 on: October 18, 2024, 04:18:49 AM »
thanks! Did you use metal washers for the screws, if so any good source?

Ludo

Re: Spcycle New Mold G056 Carbon Gravel Frame
« Reply #156 on: October 18, 2024, 04:23:51 AM »
You can also get button head titanium screw for about same cost.

Ultramic

Re: Spcycle New Mold G056 Carbon Gravel Frame
« Reply #157 on: October 18, 2024, 04:46:48 AM »
https://it.aliexpress.com/item/1005005070119421.html?spm=a2g0o.order_list.order_list_main.81.4e6c36963nerJf&gatewayAdapt=glo2ita

M5 x 10 mm flat head, worked for my frame

I originally switched to black screws and washers but I'm looking to swap them out for rubber plugs/grommets to reduce the chance of rust and also weight savings  :D ;D ;D. I've tried 4.5mm plugs but they are too small and will need to try out 5mm.

hsaus

Re: Spcycle New Mold G056 Carbon Gravel Frame
« Reply #158 on: October 18, 2024, 06:20:26 AM »
I put these nylon bolts in the unused mount points of my frame. Lightweight, and won't rust. Size M5

https://www.aliexpress.com/item/1005005853015671.html

Tijoe

Re: Spcycle New Mold G056 Carbon Gravel Frame
« Reply #159 on: October 18, 2024, 02:00:42 PM »
I put these nylon bolts in the unused mount points of my frame. Lightweight, and won't rust. Size M5

https://www.aliexpress.com/item/1005005853015671.html
I tried Nylon screws for blank threaded holes in a frame years ago.  I left them in the frame for several years.  When I tried to remove them, the Phillips head stripped out.  It turned into a medium mess drilling out the nylon and then tapping the 5mm threads to get the rest of the Nylon out.   I believe that Nylon absorbs water over time and they can swell/lock  into the threads.   I recommend that you remove them on a regular basis and/or use an anti-seize compound.   
These days, I use a dab of silicone RTV to plug holes that aren't used.   (Easily removed and stays in place unless you are using a pressure washer or rub on the RVV while cleaning)