Author Topic: LTWOO ER9 & ERX - Electronic groepsets  (Read 1452442 times)

Rajmundx

Re: LTWOO ER9 & ERX - Electronic groepsets
« Reply #1800 on: November 12, 2025, 06:46:36 AM »
I'm looking for a crankset that works well with the Ltwoo ER9 v3.0 and will allow me to easily install a Magene P515 spider in the future, for example. I also care about how it looks — I want something that looks good. Does anyone have a proven setup?

Udeson

Re: LTWOO ER9 & ERX - Electronic groepsets
« Reply #1801 on: November 12, 2025, 06:54:59 AM »
I'm looking for a crankset that works well with the Ltwoo ER9 v3.0 and will allow me to easily install a Magene P515 spider in the future, for example. I also care about how it looks — I want something that looks good. Does anyone have a proven setup?

I went with a Senicxs PR3 https://de.aliexpress.com/item/1005005817407755.html because chainline of 43,5mm seems to be a good match with specs for my ERX v3. But I do not know if it will fit your Magene Powermeter spider....

Ludo

Re: LTWOO ER9 & ERX - Electronic groepsets
« Reply #1802 on: November 12, 2025, 07:04:17 AM »
I'm looking for a crankset that works well with the Ltwoo ER9 v3.0 and will allow me to easily install a Magene P515 spider in the future, for example. I also care about how it looks — I want something that looks good. Does anyone have a proven setup?

Isn’t the Magene interface proprietary?


TCR Boy

Re: LTWOO ER9 & ERX - Electronic groepsets
« Reply #1804 on: November 12, 2025, 08:45:15 AM »
Myself and my friend both have L-twoo electronic road groupset.

Both of us have the same issue of left shifter battery drain causing front mech to not work.

Is this a common issue and is there a fix?

Pupilorutero

Re: LTWOO ER9 & ERX - Electronic groepsets
« Reply #1805 on: November 12, 2025, 08:52:46 AM »
Which version do you and your friend have?

TCR Boy

Re: LTWOO ER9 & ERX - Electronic groepsets
« Reply #1806 on: November 12, 2025, 08:59:21 AM »
I have ER9 and he has ERX both only a few months old

Udeson

Re: LTWOO ER9 & ERX - Electronic groepsets
« Reply #1807 on: November 14, 2025, 12:29:46 PM »
Hey Fellows,

I've finally managed to install my purchased ERX groupset.
I bled the brakes as described in the instructions. Everything's fine on the right brake lever. The left brake lever looks like it's leaking out from the upper locking bolt on lever. You can see the mineral oil seeping out.
Additionally, the pin/piston in the brake lever (I think it is called master cylinder) is making a smacking noise (this isn't the case with the right brake lever) - see video attached.
Do you guys have any similar experience and/or way of explaining how, or if it's even possible to repair it?

If it is not repairable, are the shiftet / levers of the ERX interchangeable with ER9 or ER7 versions and where to get this as separate spare parts?


Thanks for your help in advance.

After much back and forth with the dealer, I finally received a (paid) replacement cylinder.

It arrived today and is exhibiting the following behavior (see video attached). I haven't completely removed the old cylinder from the handle yet, but it seems like this is the cause of the oil leak. What's your opinion on this? Is this normal behavior for the cylinder, or should there be no oil leakage at all?



Pumpkin

Re: LTWOO ER9 & ERX - Electronic groepsets
« Reply #1808 on: November 24, 2025, 03:47:06 AM »
Hi, the hood on the left shifter of my Gen1 eRX group is torn.
I need a replacement, left side only or a set. Has anyone got an idea where to source?

jonathanf2

Re: LTWOO ER9 & ERX - Electronic groepsets
« Reply #1809 on: November 24, 2025, 10:46:31 AM »
Hi, the hood on the left shifter of my Gen1 eRX group is torn.
I need a replacement, left side only or a set. Has anyone got an idea where to source?

https://www.aliexpress.us/item/3256807100820575.html

Markus_HiHo

Re: LTWOO ER9 & ERX - Electronic groepsets
« Reply #1810 on: December 03, 2025, 06:58:54 AM »
Hi,

my ER9 groupset is not working anyone, it is completely dead. In the morning everythings was working. At the evening no response, nothing. I checked the power of both batteries and the wires, everything looks good.

Has anyone else had this kind of error?

BR Markus

emuinaus

Re: LTWOO ER9 & ERX - Electronic groepsets
« Reply #1811 on: December 07, 2025, 05:21:38 PM »
Hi,

my ER9 groupset is not working anyone, it is completely dead. In the morning everythings was working. At the evening no response, nothing. I checked the power of both batteries and the wires, everything looks good.

Has anyone else had this kind of error?

BR Markus


I'm having a similar issue with my eR9. Initially the issue was that it did not charge when plugged in. The battery is now dead - I tried removing the cells and charging them separately, but once the cells are removed and reinstalled they need to have the charger plugged in to activate them, so I still have an inactive system.
A new front derailleur did not fix that issue, nor did new cables or a new battery.

The derailleur and cables were sent by the ltwoo store trying to sort the issue and the battery case I bought from another aliexpress store to try and accelerate the process because each item they send takes a good 2-3 weeks to get here.
They're now talking about sending me a new battery, despite me telling them I have already sourced a second battery that did not fix the issue.

Markus_HiHo

Re: LTWOO ER9 & ERX - Electronic groepsets
« Reply #1812 on: December 08, 2025, 02:06:41 PM »
I already have tested my groupset with another batteries and battery box, no improvement. Since that, I have been waiting for feedback since then.

Which version do you have?

jonathanf2

Re: LTWOO ER9 & ERX - Electronic groepsets
« Reply #1813 on: December 08, 2025, 03:44:41 PM »

I'm having a similar issue with my eR9. Initially the issue was that it did not charge when plugged in. The battery is now dead - I tried removing the cells and charging them separately, but once the cells are removed and reinstalled they need to have the charger plugged in to activate them, so I still have an inactive system.
A new front derailleur did not fix that issue, nor did new cables or a new battery.

The derailleur and cables were sent by the ltwoo store trying to sort the issue and the battery case I bought from another aliexpress store to try and accelerate the process because each item they send takes a good 2-3 weeks to get here.
They're now talking about sending me a new battery, despite me telling them I have already sourced a second battery that did not fix the issue.

Hard reset the RD like 30 times (seriously) by holding the RD button down for 10 seconds, over and over again. Also factory reset the groupset from the app and try re-pairing the shifter several times over.

I had an issue similar to this and I was about to revive my groupset. After that, I haven't had any problems.

Bonka

Re: LTWOO ER9 & ERX - Electronic groepsets
« Reply #1814 on: December 09, 2025, 04:55:05 PM »
Hello everyone! I apologize for the language; I'm using a translator. :)

I've been trying to finish reading this thread for six months, but due to the excessive amount of empty talk and philosophical reasoning, it turned out to be harder than I thought.

It's really strange that there's essentially zero useful information in 120 pages, and it's simply impossible for someone looking for answers, or even a beginner, to find anything.

I bought a blue erx v2 a year ago and only stumbled upon this forum after I washed my bike. :)

I don't know what's going on with your v3, but the v2 is just as much crap as the v1. Judging by the fact that they simply sealed the charging port (through which water was getting into the derailleur) rather than fixing it, I can conclude that the v3 is also crap.

A couple of pages ago, someone asked about compatibility with the Karo. It's there and works. In my training sessions, it even records the number of shifts, where and what gear I was riding, etc.

The chain tension really irritated me, even with the chain guide hole at its maximum position. A couple of times, my chain came off on bumps. I disassembled it and moved the spring bend to a different position, and got significantly more tension.

Even if you have a problem with the FD shifter, and it drains the battery, but not without it, 90% of the time the FD is to blame. If you're still experiencing battery drain, the FD is to blame, and it's just water in it. Then, share your experience, which I've been able to accumulate over the past year.

My friends have wheeltops, and they work great for everyone (there's a reason so many complete bikes are sold on EDS). If they were to break, it would be a serious stain on the bike manufacturer. I decided to get LTwoo, hoping it would work just as well. How wrong I was.

The brakes are fantastic. From bleeding to operation, they were the only thing I had no problems with. I was much less pleased with the 105 in terms of bleeding and subsequent operation.

Everything else didn't work properly for a single day. The front derailleur only works when I hit a pothole or kick it, and the entire group cuts out on climbs. I don't understand why this keeps happening to me. 🤣

The wires weren't frayed, there was just a break where the pins were soldered when I cut the insulation. I realized why—it's high quality! Luckily, I had the opportunity, and I was able to fix it. (It wasn't a problem, I just thought I'd share.)

The suppliers in my city stopped selling LTwoo completely due to widespread problems. I'm very happy with this decision, but I'm left without a warranty. I wrote to the sellers on Aliex. They listened attentively at first, then passed it on to the "engineers," but then the "official" account claimed it was my fault and that the device wasn't waterproof. I attached screenshots from the user manual, and they simply ripped me off. After each seller passed the videos on to the engineers, they finally replied that they couldn't help me because I didn't buy the product from them. But then, what's the point of all these weeks of back-and-forth? They knew right away that I didn't buy from them. I just wanted to connect to the factory through them, but they ripped me off and aren't responding.

Next, I'll share my experience with disassembling and repairing the RD.

If anyone can measure the Ultegra OSPW mount for me, please let me know. I'd be very grateful. I only have the 105, and it has slight differences in the mount. I want to replace the OSPW, but I don't want to buy the ltwoo. I'd like at least the Ryet, but I want to be sure of compatibility.