Lightcarbon: New LCR017-D (or Yishun R1058-D)

[eugeniob]

Today from Wendy 

[Fer9n]

Does anyone have a recommendation for spacers on AliX? Need additional ones, but LCs shipping is quite costly, so i'd rather just order on AliX-.

Thanks

[eugeniob]

Does anyone have a recommendation for spacers on AliX? Need additional ones, but LCs shipping is quite costly, so i'd rather just order on AliX-.

Thanks

Where are you ?

I have 2 spacer of 10 mm  and 1 oh 5 mm that I don't use.

[Fer9n]

Where are you ?

I have 2 spacer of 10 mm  and 1 oh 5 mm that I don't use.

Would be dope. Germany

[eugeniob]

Would be dope. Germany

For send to you, my forwarders want about 25 Euros if you have other solution send me the shipping label @ eugeniob@racine.ra.it 

[dinorello]

For send to you, my forwarders want about 25 Euros if you have other solution send me the shipping label @ eugeniob@racine.ra.it

Aliexpress would be cheaper

[eugeniob]

For those interested, this is the Sticker

[eugeniob]

Upgrade !!

The writings are a bit big but the effect is good, it's no longer an anonymous bike

[Dareios]

So is the frame quality actually as good as Hambini says?
I'm also curious about the weight of the overall bikes that people on this forum were able to reach.

[rasch]

So is the frame quality actually as good as Hambini says?
I'm also curious about the weight of the overall bikes that people on this forum were able to reach.

Frame quality from the pieces I've seen is quite good.
It's not the most eye-catching frame though. But there are worse.
Weight is just as announced. You'd just need to add paint in case you want but that should not go over 100g
So it all depends on how u spec it up. Last one I did for myself was pretty light. Shimano 7020 with some 1330g wheels.
It's pretty confortable with 32mm tires

Biggest inconvenience is really the stupid derailleur hanger. Other than that is at any bigger western brand level

[ceres]

Frame quality from the pieces I've seen is quite good.
It's not the most eye-catching frame though. But there are worse.
Weight is just as announced. You'd just need to add paint in case you want but that should not go over 100g
So it all depends on how u spec it up. Last one I did for myself was pretty light. Shimano 7020 with some 1330g wheels.
It's pretty confortable with 32mm tires

Biggest inconvenience is really the stupid derailleur hanger. Other than that is at any bigger western brand level

I also confirm that the bike is great—easy to handle and responsive, definitely on the stiff side.

I can confirm the issue with the hanger as well—I hate it! It's a shame that Lightcarbon doesn't do anything about it. I believe that with a different hanger design (without changing the frame's mounting area), this flaw could be fixed. Too bad!

[Ar26]

It is a versatile frame. Mounted in Di2 Ultagra, TPU and GP5000 tire in 30 ( wheels 1330 gr ) , it weighs about 7.4 kg (size 54). The notions of rigidity, comfort etc. are very personal and therefore very subjective. Riding at 35 km / h is a warm-up for some and the apotheosis for others. I have not noticed any problem with the integrated handlebar but be careful with the measurement (100 mm = 110 mm). For the spacers, I do not remember if they are the original ones but I put spacers that clip on. This allows me from time to time to more easily clean the dirt placed on the upper and lower headset of the fork.

[AdamB]

Hey everyone, I received my lcr017-d about a month ago. Since then, I probably did around 700km on. Last week, a creaking appeared from the bottom bracket area and was getting louder as I rode more (Also just realized why I felt like my bike was bending sideway when braking....) . This afternoon, while changing my BB, I discovered this pretty big crack

While searching through this forum, I don't think I've seen something similar. What should I do next? I already contacted LightCarbon, but don't have high hopes of resolution...

[Rebel_Yell]

Hey everyone, I received my lcr017-d about a month ago. Since then, I probably did around 700km on. Last week, a creaking appeared from the bottom bracket area and was getting louder a I rode more (Also just realized why I felt like my bike was bending sideway when braking....) . This afternoon, while changing my BB, I discovered this pretty big crack

While searching through this forum, I don't think I've seen something similar. What should I do next? I already contacted LightCarbon, but don't have high hopes of resolution...

Please keep us updated.  I am hoping Light Carbon takes care of this. They should.

[jordanc1010]

I hope they do take care of this. Im thinking about buying one. If they dont its definitely going to scare me away.