Author Topic: Replica Factor Ostro VAM  (Read 627384 times)

skflakess

Re: Replica Factor Ostro VAM
« Reply #585 on: January 11, 2026, 10:13:41 AM »
No, it's not a joke, and yes, I'm a bit of a riding position expert. When I see that seat height and the spacer height, I figure the person must be around 180cm tall. Also, it's forbidden to use more than 4cm of spacer. Anyway, that's just advice; I'm not the one riding that! :o

dude just shut up. you haven't even seen the man who's riding this bike and you're out here saying their bike is wrong size.
And are you the UCI now? saying it's "forbidden" to use more than 4cm spacer?? what a joke!
Shut up and just ride your fake Ostro!

BIFO17

Re: Replica Factor Ostro VAM
« Reply #586 on: January 11, 2026, 04:38:15 PM »
Relax, I didn't insult you, so please remain courteous and polite.

As for the 4cm max, just take the time to read the instructions; it'll educate you. And whoever liked this kind of comment can do the same.
Since I'm making an observation and a recommendation, I'm not forcing anyone to listen, but since we're on a forum where mutual support and goodwill are valued rather than hatred, I'm trying to help, unlike this pointless post! ::)

volan

Re: Replica Factor Ostro VAM
« Reply #587 on: January 14, 2026, 11:01:23 AM »
You need to take a size 56 !
you have too much spacer under your stem

Saddle to hb drop is really not that high. And those spacers, sure, maybe a bit taller side, but also not THAT tall. I would say he's in between sizes, chose smaller and adjusted with spacers. He could use larger size, but it's not a "must" imo.

BIFO17

Re: Replica Factor Ostro VAM
« Reply #588 on: January 14, 2026, 12:32:07 PM »
Hello, Warning and remember.
When you have to compensate for the head tube height with too many spacers, it's a clear sign that the bike is too small. In conclusion, either the rider is too tall and/or not flexible enough, regardless, this frame size or geometry is completely unsuitable. Consider going up a size and shortening the stem. You could also consider foregoing a combo handlebar to reverse the stem angle (-6° to +6°) and gain some height.
It is very dangerous to exceed the specifications. Risk of Pivot breakage (see excerpt from the Ostro VAM 2.0 assembly manual).


skflakess

Re: Replica Factor Ostro VAM
« Reply #589 on: January 17, 2026, 05:37:52 PM »
Relax, I didn't insult you, so please remain courteous and polite.

As for the 4cm max, just take the time to read the instructions; it'll educate you. And whoever liked this kind of comment can do the same.
Since I'm making an observation and a recommendation, I'm not forcing anyone to listen, but since we're on a forum where mutual support and goodwill are valued rather than hatred, I'm trying to help, unlike this pointless post! ::)

let me also teach you internet forum etiquette.

"If no one is asking for your opinion, just shut up"


The guy just really posted his ride; not asking for anything. They are not even consulting if the bike is too small or big.
Is OP your friend? how would you know he needs a different size of bike? how? how?

Just because you read "warning" on some user manual that on one ever reads, doesn't mean you can come here acting like you're the best bike fitter who can easily determine the correct size for the rider.

Again, you're a joke! ;D
« Last Edit: January 17, 2026, 05:42:24 PM by skflakess »

kubackje

Re: Replica Factor Ostro VAM
« Reply #590 on: January 18, 2026, 03:47:18 PM »
dude just shut up. you haven't even seen the man who's riding this bike and you're out here saying their bike is wrong size.
And are you the UCI now? saying it's "forbidden" to use more than 4cm spacer?? what a joke!
Shut up and just ride your fake Ostro!

4cm of spacers is a joke and you're the one who should shut up

BIFO17

Re: Replica Factor Ostro VAM
« Reply #591 on: January 19, 2026, 01:17:25 AM »
let me also teach you internet forum etiquette.

"If no one is asking for your opinion, just shut up"


The guy just really posted his ride; not asking for anything. They are not even consulting if the bike is too small or big.
Is OP your friend? how would you know he needs a different size of bike? how? how?

Just because you read "warning" on some user manual that on one ever reads, doesn't mean you can come here acting like you're the best bike fitter who can easily determine the correct size for the rider.

Again, you're a joke! ;D

 ;D You made my day with a good laugh. You're a joke all by yourself.
You contribute nothing to this forum except your gratuitous attacks.
You don't read and you ask questions that have already been answered.
You invent rules that suit you.
 1/ When you post on social media, you have to accept receiving criticism as long as it remains constructive. Freedom of expression, respectful debate based on facts and rules. Once again, I'm making an observation, relying on best practices, and highlighting points of vigilance regarding risks. This is just my opinion, but I'm not the one who would have problems.
 2/ If manufacturers inform you of risks, it's not just for show (would you put diesel in a gasoline car despite the warning light???). You'll be at 20 Nm when they tell you 15 max?  The UCI has nothing to do with this; it's engineering.
 3/ I never claimed to be the best fitter in the world; in fact, I'm not a fitter. You're making things up to bolster your denialist rhetoric.
Conclusion. You're a forum troll.
Take a coffee and go ride, please  ::)
« Last Edit: January 19, 2026, 12:27:36 PM by BIFO17 »

bikemanie5

Re: Replica Factor Ostro VAM
« Reply #592 on: January 20, 2026, 05:34:15 AM »
What's the overall opinion on the best supplier of the V2? Currently Taiwan Eisen Carbon Frame Store looks great on their website. I've ordered a frame from rocking cycle store in the past and that was great, had a few annoying things but was safe and great to ride. Taiwan Glory frames on here look good but that top cap issue would annoy me.

I couldnt find F-C on aliexpress do they still exist?

JejaVerMa

Re: Replica Factor Ostro VAM
« Reply #593 on: January 20, 2026, 10:08:52 AM »
I have Leese cranks.

https://a.aliexpress.com/_EvzFpQU

Does anyone know how many spacers should I use between Bottom bracket and cranks?

bdyck

Re: Replica Factor Ostro VAM
« Reply #594 on: January 22, 2026, 08:28:46 AM »
I have Leese cranks.

https://a.aliexpress.com/_EvzFpQU

Does anyone know how many spacers should I use between Bottom bracket and cranks?

If I remember properly, 1mm on the drive side. But in general, as many as it takes to get the preload right and the cranks centered on the frame.

crazyravr

Re: Replica Factor Ostro VAM
« Reply #595 on: January 22, 2026, 08:47:28 AM »
It will also matter which BB you went with, t47 or t47A.

BIFO17

Re: Replica Factor Ostro VAM
« Reply #596 on: January 22, 2026, 01:25:11 PM »
T47a on ostro

crazyravr

Re: Replica Factor Ostro VAM
« Reply #597 on: January 22, 2026, 01:26:42 PM »
T47a on ostro

Should be used. But many people are using t47 and stacking spacers on one side to make it "work". Then complain about the frame or BB quality.

principiamacb

Re: Replica Factor Ostro VAM
« Reply #598 on: January 23, 2026, 05:09:20 AM »
What's the overall opinion on the best supplier of the V2? Currently Taiwan Eisen Carbon Frame Store looks great on their website. I've ordered a frame from rocking cycle store in the past and that was great, had a few annoying things but was safe and great to ride. Taiwan Glory frames on here look good but that top cap issue would annoy me.

I couldnt find F-C on aliexpress do they still exist?

I've just received mine from Taiwan Eisen. Looks absolutely stunning. The paint and graphics are perfect. I've not fully built it yet but everything has fitted perfect so far (Headset bearings, seatpost etc). The stem top cap is correct but the bolt is the wrong type. It's a standard cap head but I think it should be a dome so it sticks up above the cap. Ill have to get he right bolt.

My only concern is the bars feel quite flexible but I've not cut the stearer or clamped anything down correctly so hopefully it should be ok.

BIFO17

Re: Replica Factor Ostro VAM
« Reply #599 on: January 23, 2026, 04:44:49 PM »
Taiwan eisen ?  This is not about Peter.
This is Joe from Vanobike ?

I don't know why he is using "Taiwan eisen" name