VeloBuild VB-R-268 frame

[patliean1]

11th page we go.

Maybe stop uploading incompatible images that corrupt the pages. If this is you...then perhaps use a 3rd party photo platform and simply share the URL.

[hubertus]

Two pages fully corrupted. Is there a way to retrospectively clean pages from these corrupted files?

And back to the 268 frame topic: what would be the ideal approach to mount a narrower bar on this frame? Would it be advisable to use the headset provided by VB or take a different route entirely?

 

[patliean1]

Two pages fully corrupted. Is there a way to retrospectively clean pages from these corrupted files?

And back to the 268 frame topic: what would be the ideal approach to mount a narrower bar on this frame? Would it be advisable to use the headset provided by VB or take a different route entirely?

Take a look at my 177 video at the 5:28 mark - I discuss the FSA no69 headset system. This allows you to run your own handlebar and stem combo. And this is precisely what I plan to use again for my 268.
https://youtu.be/tA6i2vBFrzE?si=o5mWWbAoCFL42EKU

FSA Vision NO.69/SRS
https://www.fsaproshop.com/products/no-69-srs

[hazzer19]

Two pages fully corrupted. Is there a way to retrospectively clean pages from these corrupted files?

And back to the 268 frame topic: what would be the ideal approach to mount a narrower bar on this frame? Would it be advisable to use the headset provided by VB or take a different route entirely?

I can finally see the latest posts (page 1 for me as I have reverse order setup) but pages 2 and 3 are still down. I asked Sitar_Ned if we could delete post #122 which could be the culprit per jepa83's comments so maybe that could fix things.

[Thegoods]

My rear axle does not fit the threads well at all. Almost feels as if it’s cross threaded initially even though it’s not. I got a Robert axle mavic replacement and it won’t thread into it it all. It’s supposed to be a direct replacement for mavic speed release, but it will not thread and I don’t want to force it and strip something. Does anyone’s rear axles thread smoothly?

[Benbenben]

Same here. Has anyone contacted VB about it?

[Deanoden]

I had the same issue.  To get it to work I sort of retreaded the frame by taking the through axle and forcing it in from the outside and then running it in and out a few time.  VB has a flaw somewhere on this part of the frame. 

[Easyfunk]

I had the same issue.  To get it to work I sort of retreaded the frame by taking the through axle and forcing it in from the outside and then running it in and out a few time.  VB has a flaw somewhere on this part of the frame.

I did exactly the same. Velobuild agreed to send me a replacement insert, but I did not receive it yet.

[hazzer19]

My rear axle does not fit the threads well at all. Almost feels as if it’s cross threaded initially even though it’s not. I got a Robert axle mavic replacement and it won’t thread into it it all. It’s supposed to be a direct replacement for mavic speed release, but it will not thread and I don’t want to force it and strip something. Does anyone’s rear axles thread smoothly?

No issues with this for me and I have used two different sets of VB rear axles and RD hangers.

[rga19071976@gmail.com]

My rear axle does not fit the threads well at all. Almost feels as if it’s cross threaded initially even though it’s not. I got a Robert axle mavic replacement and it won’t thread into it it all. It’s supposed to be a direct replacement for mavic speed release, but it will not thread and I don’t want to force it and strip something. Does anyone’s rear axles thread smoothly?

Good afternoon: For my part, no problem in that matter.
The only thing about the entire assembly that is giving me any problems is the issue of anchoring the saddle. I had an Elita One carbon saddle installed but it was giving me some discomfort so I changed it for a Prologue Scrath M5 with round rails. I have tightened it to 15N and even today when I went over a bump it moved a little. It occurred to me to use blue Loctite applied to the entire area and see how it goes.

[hubertus]

Just ordered this frame to do a build for my girlfriend.

Velobuild 268 (in glossy pearl white, because of the incredible pictures shared earlier)
Complete Shimano 105 mechanical 12 speed groupset
Elitewheels ENT disc 38mm x 28mm wheels
GP5000 28mm
TPU inner tubes

Quick question: only part lacking is finding a saddle. Any (scientific / structured) approach on finding one for her?

[cramy]

Just ordered this frame to do a build for my girlfriend.

Velobuild 268 (in glossy pearl white, because of the incredible pictures shared earlier)
Complete Shimano 105 mechanical 12 speed groupset
Elitewheels ENT disc 38mm x 28mm wheels
GP5000 28mm
TPU inner tubes

Quick question: only part lacking is finding a saddle. Any (scientific / structured) approach on finding one for her?

maybe check the ryet aircode 3d.
https://fr.aliexpress.com/item/1005005209973776.html?spm=a2g0o.detail.0.0.1391J7XXJ7XXnu&mp=1&gatewayAdapt=glo2fra

[jcr]

Complete Shimano 105 mechanical 12 speed groupset

Will be interested to hear your experience on routing on this bike

[Cnasta]

Just ordered this frame to do a build for my girlfriend.

Velobuild 268 (in glossy pearl white, because of the incredible pictures shared earlier)
Complete Shimano 105 mechanical 12 speed groupset
Elitewheels ENT disc 38mm x 28mm wheels
GP5000 28mm
TPU inner tubes

Quick question: only part lacking is finding a saddle. Any (scientific / structured) approach on finding one for her?

I'd love to see some (or: a lot) pictures of that frame/color. Thinking about the same color Allready sourced a Ultegra 11sp di2 groupset 2nd hand. Would make a killer bike I think (this or the Ican A40)

[hubertus]

I will definitely circle back the pictures, and can provide details on the build process. Especially on the topic of going mechanical this time.