Xiamen Carbon Speed rims/wheels

[Sander2177]

Probably slightly under. My 50/65 set in t800 is 1332, and they're the 26 internal.

That's a great weigh!
I Looked at there site, should not have been so lazy    so 75 +/-10g so if your lucky and want light weight 95g.
Currently I have CRWs and the were 1280g for 50/60, so 53g at half the price is fantastic VFM!

[PeterXu]

That's a great weigh!
I Looked at there site, should not have been so lazy    so 75 +/-10g so if your lucky and want light weight 95g.
Currently I have CRWs and the were 1280g for 50/60, so 53g at half the price is fantastic VFM!

65-33 both front and rear T1100 20/20H UD paintless combo weigh around 1315-1325g/pair

[Sander2177]

65-33 both front and rear T1100 20/20H UD paintless combo weigh around 1315-1325g/pair

Thanks for the picture Peter appreciated! would the 24mm IW rims be lighter? dont trouble yourself sending a picture, your probably busy enough!

[PeterXu]

Thanks for the picture Peter appreciated! would the 24mm IW rims be lighter? dont trouble yourself sending a picture, your probably busy enough!

Actually I did mention in my above post. Both front and rear 60-31 24IW UD paintless 20/20H wheels weigh around 1250-1260g/pair. If possible, check our previous posts in this topic, you would find out a lot

[PeterXu]

Hi guys, we will leave for Taipei cycle show 3 days later, some orders might not be shipped out in time until April 1st.

[patliean1]

INCOMING...

65mm 34 external/26 internal - 5.0mm carbon spokes and ceramic bearings.

I opted for the T800 instead of the lighter T1100. Still lighter though than my Magene Ultra DB607, Winspace Hypers, and Elite Drive/Helix as similar depths. Thanks Peter!

[SAM2013]

26mm internal 35mm depth super light climb wheels, 1090g/pair

D35CU-33 T1100 rims 20/20H UD paintless
Carbon Speed in-house hubs titanium color 20/20H 54T rachets TPI ceramic bearings center lock straight pull for 100*12/142*12 HG driver, 3.8mm carbon spokes

Not sure if I should PM, but copy/pasting is a pain on my phone so hope
You won’t mind me asking here- what would be price shipped to Ireland for these Peter?

Many thanks

[Sander2177]

INCOMING...

65mm 34 external/26 internal - 5.0mm carbon spokes and ceramic bearings.

I opted for the T800 instead of the lighter T1100. Still lighter though than my Magene Ultra DB607, Winspace Hypers, and Elite Drive/Helix as similar depths. Thanks Peter!

Sick Wheels Patrick!  I have no whittled it down to a set of 65mm wheels but looking to see if I can go sub 1300g. Will wait patiently for your video!

[Nkearb]

INCOMING...

65mm 34 external/26 internal - 5.0mm carbon spokes and ceramic bearings.

I opted for the T800 instead of the lighter T1100. Still lighter though than my Magene Ultra DB607, Winspace Hypers, and Elite Drive/Helix as similar depths. Thanks Peter!

My second wheelset from peter just shipped, D50CU36 rims, t800, 24/24, pillar 1420 and they are 1350grams My first wheelset is similar to my new except D65CU33 and weight is 1500grams.


Based off my wheels and Pattys wheels here, it seems the T800 rim weights have decreased from peters wheelset from last year. T800 wheelsets are ~70grams less than what I estimated from previous wheels on this thread. I am definitely not complaining 

[Sander2177]

Hey Peter can you supply wheels with  Extralite Hubs?
I’m also looking at a 60-65mm deep wheels set T1000 targeting -1200grams

[PeterXu]

Not sure if I should PM, but copy/pasting is a pain on my phone so hope
You won’t mind me asking here- what would be price shipped to Ireland for these Peter?

Many thanks

850 USD/pair with Shimano HG driver, excluding shipping

[PeterXu]

Hey Peter can you supply wheels with  Extralite Hubs?
I’m also looking at a 60-65mm deep wheels set T1000 targeting -1200grams

Yes we do. But only Extralite hubs 24/24H for regular stainless spokes, No carbon spokes option.

[Sander2177]

Yes we do. But only Extralite hubs 24/24H for regular stainless spokes, No carbon spokes option.

Ahhh well I might be jumping gun they have just released SPC 3 hubs 24/24h centre lock 200g a set.
Will accept straight pull steel and carbon max tension 1176nm.
So much choice so hard to make up mind! :-(
Almost like something new released every week

[SAM2013]

850 USD/pair with Shimano HG driver, excluding shipping

Thanks Peter, I'll drop you an email on Monday.

[Sander2177]

24mm internal width 50mm and 60mm depths rims would be available early April.

Will You be making these rims in any other sizes?
65mm?