Mondince new 2026 Aero Gravel

[Japeke]

Mäybe 48 or 50t with dub wide/grx. There's plenty of room with a 46t chainring. I'm pretty sure 46t will fit with road cranks too

[biceryder]

I have been in communication with Jim originally he told
me it was max 42t but then corrected it to 46t after checking.  Now that it is confirmed I just need to decide between the 306, 326 and 336.  I think I may have written off the 296 for now but that could change.

[Unsworn5836]

Got mine recently. Yet started to get used to the color.
Not built yet as several parts are missing…

[AG1]

Has anyone ridden Schwalbe 2.1 Thunder Burts on this frame for a longe period of time and can share their opinion on the clearance?

[impmonkey]

Got out on the new build for a bit of a shakedown ride.
Hood need tightening but so far so good. Getting used to the smaller 38cm bars.

[cosmostar]

What the max chainring size for the 326 in 1x?

I have a same frame by spcycle, a chainring 48t is installed. Crankset Sram Rival Wide.

[CJ]

FM316 in action this past Saturday

[OldFish]

Still waiting for my frameset but received Tagoola XPRL wheelset and pretty much all other parts.

50mm SCHWALBE G-One R Pro Supra V-Guard (black) measure at 52.5-52.8mm 32iw/41ew @ 3 bars (just setup as tubeless)

[v0llhirsch]

Still waiting for my frameset but received Tagoola XPRL wheelset and pretty much all other parts.

50mm SCHWALBE G-One R Pro Supra V-Guard (black) measure at 52.5-52.8mm 32iw/41ew @ 3 bars (just setup as tubeless)

50 mil tires at 3 bar?
That's sounds like a lot, I run my rx pro under 2 bar (also tubeless) on 28mm inner width wheels

[OldFish]

50 mil tires at 3 bar?
That's sounds like a lot, I run my rx pro under 2 bar (also tubeless) on 28mm inner width wheels

Yeah, I will definitely not be running them like this I just had them setup tubeless and then I usually leave overnight at 3bar to see if nothing is leaking or such.

It will be under 2 bar when in use I think as well. Have not played with Silca calculator yet and it's my first gravel so not fully calibrated on this.

[www]

Hey guys,

Long time lurker, first time poster.

I’m considering using this frame for a fast gravel build (mostly flat terrain), likely with a 52/36 setup.

For those of you who own this frame — do you think 52/36 chainrings will fit without clearance issues (chainstay / FD / tire)?

Any real-world feedback would be much appreciated.

Thanks!

[Japeke]

25id wr50 and 29x2.1 burt. 3-4mm clearance. Ok for me.

Esit: more pics.

Maybe littlebit shimming to left side. There is more space on the non-drive side.

46t chainring.

[Pistonbroke]

Hey folks
Has anyone used this on the road with road tyres and would give some feedback please.
Thanks!

[alfiomotrambo]

I was considering this frame for my summer gravel build. Does anyone have any handlebar suggestions? I was thinking about the Thin Line https://it.aliexpress.com/item/1005006982346599.html since I already use it on my road build. Any suggestions?

[gribs]

Hey folks
Has anyone used this on the road with road tyres and would give some feedback please.
Thanks!

I've used mine briefly with road wheels (32mm GP5000) for one lap of Coniston water. I was planning a recce of Hardknott and Wrynose passes as I'm doing the Fred Whitton in May and put my gravel wheels back on (50mm Terra trail). The road wheels are a bit faster but I wanted the comfort and I don't feel the slower handling of the bike really suits fast road use. I'll be doing the event on my road bike though.