Chinertown
Other Resources => Component Deals & Selection => Topic started by: crazyravr on February 24, 2026, 09:20:13 AM
-
Took a chance on these from AE to keep as a spare wheelset. Came in two weeks. The box as always took a beating along the way but the wheels are good. These came in with rim tape, spare carbon spokes and TPU tubes. Impressed with the weight and i have never seen a hub packed with grease like that from China manufacturing.
Not a chance to ride these outside but I’ll be sure to update thespian once update once we stop getting -20C temps.
www.aliexpress.com/item/1005010279504846.html
-
I already have them installed on my bike. I removed the rim strip and installed tubeless tape. The weights shown in the photos are with tubeless tape. So far I’m very happy with them; from the little I’ve been able to test, they are very stiff wheels, with incredible lateral stiffness. I love how they respond during accelerations.
-
I've fitted these to my gravel bike.
Can't say I have any issues about the quality, they do seem a little grabby with crosswinds but its also my first time using tyres this wide too so that may be the problem.
Would buy again and some very good deals using UK ebay
Edit to add i bought the steel spoke version, 1290g for 50mm
-
I've fitted these to my gravel bike.
Can't say I have any issues about the quality, they do seem a little grabby with crosswinds but its also my first time using tyres this wide too so that may be the problem.
Would buy again and some very good deals using UK ebay
Carbon spoked wheels are known to not do well with crosswind.
-
Carbon spoked wheels are known to not do well with crosswind.
You have any experience or you just heard this bullshit somewhere?
-
I just ordered some. I'll let you know when they arrive and I've tried them out; I'll use them in competition and test them out. I weigh 71 kg and can put out 1600-1700 watts in a sprint, so I'll do a full review.
I already used CSC wheels with carbon spokes and a very similar weight, and the flat spokes on the rear wheel twisted, becoming misaligned with the wheel, which negatively affected aerodynamics. I hope these wheels are a bit stiffer. :) :)
-
I've fitted these to my gravel bike.
Can't say I have any issues about the quality, they do seem a little grabby with crosswinds but its also my first time using tyres this wide too so that may be the problem.
Deep rims and big tires are sails.
The average windspeed in my area is nearly 13mph/20kmh. The road layouts are in a grid so most of the time its coming at some type of crosswind angle. -- I run as shallow of a wheel I can find because the aero benefits of a deep wheel don't overcome how annoying the buffeting from cross winds are for me. Bladed spokes are such a small change that I've never noticed a difference (my road bike has wheelsets in both bladed and regular spokes).
-
You have any experience or you just heard this bullshit somewhere?
Personally? No.
Reviewers I tend to follow online regularly mention 3 things in regards to carbon spoked wheels.
1. Weight savings
2. Stiffer/harsher ride all things being equal
3. Noticeable impact by crosswinds
-
Deep rims and big tires are sails.
The average windspeed in my area is nearly 13mph/20kmh. The road layouts are in a grid so most of the time its coming at some type of crosswind angle. -- I run as shallow of a wheel I can find because the aero benefits of a deep wheel don't overcome how annoying the buffeting from cross winds are for me. Bladed spokes are such a small change that I've never noticed a difference (my road bike has wheelsets in both bladed and regular spokes).
Same here for me. Midwest USA. Grid layout for most country roads is a great flat on workout. With the wind you can fly like Chuck Yeager!. Then you make the turn 90 degrees and your in wind tunnel testing F35 Raptors.
-
Curious to read the feedback here, the look like the new value for money option on Aliexpress, with lots of great reviews.
-
I also ordered a pair in 24mm 50mm depp from ebay for arount 300€ shipped incl. everything which is a real bargain, will report back once i have them
-
Are these huge white rim decals removable on the carbon spoked Version?
-
I went and sprung for a set of these Kore hubs as they were priced very nicely and i figured it would be worth a punt. https://www.aliexpress.com/item/1005008666087905.html
Will compare them to some of the standard Goldix offerings and see how they hold up.
-
Goddamn, a 1200g 24/30 set for mere 450 USD with the upgraded ratchet? That is a steal. I am very tempted. :o
-
Do you guys trust them at this price point? 🤔
-
Do you guys trust them at this price point? 🤔
Only one way to find out 8) ;D ;D
-
DOO IT!
And give us a review pls 🤣🤣
-
DOO IT!
And give us a review pls 🤣🤣
No followup review is also a review!
-
DOO IT!
And give us a review pls 🤣🤣
Say no more, I’ve just pulled the trigger xD
-
Had my first ride with the wheels - using them on my gravel commute bike. Nothing to complain. They are extremely load, the loudest wheels I have. For 300€ shipped via eBay that is a no brainer for me
-
Had my first ride with the wheels - using them on my gravel commute bike. Nothing to complain. They are extremely load, the loudest wheels I have. For 300€ shipped via eBay that is a no brainer for me
Mine are on the way, the 60T ratchet, can’t wait haha. How is the build quality and how true they are?
-
I'm not qualified to tell if they are true ::) I couldn't find a flaw, for me the build quality seems solid. But as im no expert and I wouldn't count too much on my judgment :-D
-
I'm not qualified to tell if they are true ::) I couldn't find a flaw, for me the build quality seems solid. But as im no expert and I wouldn't count too much on my judgment :-D
Easier question would be if they wobble a lot or not :D
-
no they don't wobble. As I said i cannot see any flaws.
-
Bought some after a youtube review. They answered very fast and a day later sent me a video through aliexpress message center of them packing the wheelset + extras and closing it.
They are now on their way to me. After they arrive i can give a short feedback. To me they are really interesting, but as a barely sub 100kg rider with a 8kg bike the 120kg system limit of the wheelset is.. very intersting :D
If they survive me, they should survive most of you :)
-
Any news on removing the decals?
-
Any news on removing the decals?
I haven’t tried it, but they look very well adhered; I don’t think they would be easy to remove. The seller indicates that this would void the warranty. They have now also added the option of black stickers, which blend in much better.
-
Bought some after a youtube review. They answered very fast and a day later sent me a video through aliexpress message center of them packing the wheelset + extras and closing it.
Was quite surprised when I received the very same video. Before that I just asked when it gets shipped haha
-
I haven’t tried it, but they look very well adhered; I don’t think they would be easy to remove. The seller indicates that this would void the warranty. They have now also added the option of black stickers, which blend in much better.
They said the black decals dont exist yet and are in production. So if you really dont like the white decals and they are under a clear coat, then just wait.
@fhold: Can you tell us if the decals are under a clear coat? if not then i guess you could heatgun them away :D
-
The decals are not under a clear coat nor are they the "water application" kind. They will come off with a heat gun and some googone following....... BUT they actually look very good on the bike!!! I see no reason removing them.
-
Im going to have a look. Generally i am a fan of white decals (preferably 3 on one side). But with my thiccc Elves Falath Evo frame, i only see black wheel sets on pictures and kinda can see that white decals might be a bit too much. So its good to know :)
-
They said the black decals dont exist yet and are in production. So if you really dont like the white decals and they are under a clear coat, then just wait.
@fhold: Can you tell us if the decals are under a clear coat? if not then i guess you could heatgun them away :D
https://es.aliexpress.com/item/1005010279504846.html?gatewayAdapt=glo2esp
(http://)
-
https://es.aliexpress.com/item/1005010279504846.html?gatewayAdapt=glo2esp (https://s.click.aliexpress.com/e/_c3n1miwV)
(http://)
You even get two TPU tubes, crazy
-
You even get two TPU tubes, crazy
Yea, 4 spare spokes, 2 TPU tubes, crazy deal. Really keen to get my hands on these. Hopefully they will arrive next week.
-
They really, really, really tempt me…
-
Bought a pair during ali aniversary for really cheap should arrive next week dont have a bike ready but hopefully in the next month or two will get to try them out.
-
My experience on these after few rides now.
- hubs are silent for about 100km and then they start to purr
- EXTREMELY stiff wheelset, most likely due to carbon spokes
- about average in cross wind
-
Wheels arrived they look great to the eye i dont have a truing stand but they look straight and spoke tension seems good to the touch. Will give an update once i have built the bike and ridden on them.
-
My experience on these after few rides now.
- hubs are silent for about 100km and then they start to purr
- EXTREMELY stiff wheelset, most likely due to carbon spokes
- about average in cross wind
Wouldnt mind them staying silent tho
-
is the ratchet identical to dt swiss style with both ratchet identical or does it use the 2style ratchet with the two semi-ratchet different?
I have a 60t kit installed in my CSC and I'm asking if I can swap the 60t to the Kore
-
Wouldnt mind them staying silent tho
Then grease the hub up and you’re golden.
-
Then grease the hub up and you’re golden.
This. I took it apart and applied a bit more ratchet grease. Nearly silent.
-
What grease would you use for the 32 ratchet version? Is a NLGI 2 fine for that?
-
What grease would you use for the 32 ratchet version? Is a NLGI 2 fine for that?
Not familiar with that one, but you can always use the DT Swiss ratchet grease.
-
I didn't know Kore had a sub-brand, interesting. The price is also interesting on this https://it.aliexpress.com/item/1005010297883797.html (https://s.click.aliexpress.com/e/_c4qs4ANx); for a "training" wheel, I'd say it's a great value. They're a bit heavy, but you can't expect much for that price. They could be a great choice, especially given the reviews.
-
They seem really interesting:
WEIGHT LIMIT :100kg (rider,bike, equipment and luggage)
That is a no go for me tho. Thats barely 90kg bodyweight at best.
-
They seem really interesting:
That is a no go for me tho. Thats barely 90kg bodyweight at best.
Surely this must be a typo. For this weight it must be at least 130kg.
-
Say no more, I’ve just pulled the trigger xD
Alright, so the wheels have just arrived. The box had a dent on top (next to the rim), but everything seems in order fortunately. Will check properly once I get back from work, will report back.
-
Alright, so the wheels have just arrived. The box had a dent on top (next to the rim), but everything seems in order fortunately. Will check properly once I get back from work, will report back.
Really intrigued. Tell us more.
Although mine are supposed to come tomorrow :)
Surely this must be a typo. For this weight it must be at least 130kg.
Probably. Thought the same. Especially since the Elite Wheel ENT 2.0 weigh about the same and are rated up to 130kg.
-
I have several Tagoola wheels and just got this one. I am a bit dubious with those wheels.
For the overall price, it seems to be a very good bargain (weight, carbon spokes etc..). However, when I squeeze the wheels, it's very soft in comparison with the Tagoola. With those latters (the four pairs from the cheapest to the most expensive model I got), I have hard time to squeeze them but with the Kore wheels, it's easy to squeeze them and see distortion.
For the other owners, if you can provide me your insight, it would be interesting. Thanks !
-
So here they are. As mentioned, the box has had a bit rougher time, but nothing major. The wheels seem okay. You can see some imperfections in the carbon, but overall they look great. I love the naked finish. Decals seem to be possible to remove with some harsh chemical, but I actually like they way they look (more than on the picture). Haven’t had the chance to mount tyres on, I am waiting for a delivery of new P-Zero Race RS tires. The weight is 1249.7g with the rimtape installed. You also get a tubeless tape if you plan to run tubeless. Their TPU tubes look decent, they are 85mm, so I will keep these as spares. I tend to use RideNow with metal valves in 65mm anyway. They spin well, but there is zero grease on the bearings and hubcaps. The 60T ratchet is loud af, and it is greased somewhat lightly. Probably due to a regrease soon. The wheels do have a drainhole, that was not clear from the pics on AliExpress.
Will get back with my initial impressions.
... but with the Kore wheels, it's easy to squeeze them and see distortion.
Hmmm, will check my pair.
-
So here they are. As mentioned, the box has had a bit rougher time, but nothing major. The wheels seem okay. You can see some imperfections in the carbon, but overall they look great. I love the naked finish. Decals seem to be possible to remove with some harsh chemical, but I actually like they way they look (more than on the picture). Haven’t had the chance to mount tyres on, I am waiting for a delivery of new P-Zero Race RS tires. The weight is 1249.7g with the rimtape installed. You also get a tubeless tape if you plan to run tubeless. Their TPU tubes look decent, they are 85mm, so I will keep these as spares. I tend to use RideNow with metal valves in 65mm anyway. They spin well, but there is zero grease on the bearings and hubcaps. The 60T ratchet is loud af, and it is greased somewhat lightly. Probably due to a regrease soon. The wheels do have a drainhole, that was not clear from the pics on AliExpress.
Will get back with my initial impressions.
Hmmm, will check my pair.
Good luck with those. I think I lose 5 years of my life trying to mount these. Those PZero are great once mounted, but to get them on........ my lord.
-
So I also received my set earlier this week and weighted them in at 1258 grams on my scale with the tape.
I also went ahead and checked all my carbon wheelsets including the KORE and they all have slight deflection if I compress them using my hand as a vise.
This is a non issue to me and is to be expected on most Carbon rims.
-
Good luck with those. I think I lose 5 years of my life trying to mount these. Those PZero are great once mounted, but to get them on........ my lord.
Haha, thanks. I actually haven’t had any issues with mounting them onto my Lightcarbon set. Oh well, let’s see. :D
-
Can the labels be removed?
-
Can the labels be removed?
You would need to use chemicals to do so and it voids the warranty.
-
Have them. Put them on my bike and am happy about them. I am in no way a pro, but they are lighter than my Elite ENT 2.0, look fire and feel fast to ride.
We will see what time will tell :)
-
Quick update after the first 110k ride
Wheels are great, very true and they look much better irl than they do on the pics. I was a little worried about the white decals, but I actually like the looks quite a lot. Wheels run pretty smooth, not sure if I just think they ride better than my Lightcarbon ones, but they do feel like it. The 60T ratchet is obnoxiously loud, will have to grease the hub up to silence it at least a bit. Putting on the Pirellis was not too hard of a job, and the tires poped on the rim quite fast. Even though both my thumbs did suffer a little. 28mm tire measures around 31mm on the rim.
I will keep testing these further. But would I recommend them right now? Absolutely. An absolute steal for 445 USD delivered. ;D
Hopefully they will also last.
-
Second the look. I really like the decals even tho i was quite sceptical of them.
Also the carbon look isnt 100% black but has a little bit of life in them. They look fantastic
-
Same impression here, the product photos really don’t do them justice, the decals looked a bit too loud to me at first, but once mounted they actually work well, eThe raw carbon finish also has a bit of texture/depth in real life instead of that flat black look you often get in the listings.
For anyone wondering which set we’re talking about, this is the one https://it.aliexpress.com/item/1005010279504846.html (https://s.click.aliexpress.com/e/_c3vpNLnL)
Honestly for the money they look way more premium than expected.
-
Have you weighed it? Is this wheelset really only 1200g?
-
Have you weighed it? Is this wheelset really only 1200g?
Mine was ca 1250g but with the rimtapes installed. So I would say it is very much around 1200g without the tape.
-
Have you weighed it? Is this wheelset really only 1200g?
The very first post here lol
I have now about 1000km on these rims. Zero issues.
-
Quick update after the first 110k ride
Another update after ≈ 750k
Wheels stilll rolling strong. Had a little issue with the front wheel, there was a strange sounds like something was loose inside. I took off the tire and the tape and fished out a piece of a plastic. I guess this was a leftover from the bladder. Other than that, I am still super happy with the purchase.
-
I recently got the MTB wheelset, mixed wheel 29/27.5 and haven't had issues yet. Going to keep punishing them before putting them on my wife's bike!
The decals came off easily by hand and didn't leave any residue.
-
I recently got the MTB wheelset, mixed wheel 29/27.5 and haven't had issues yet. Going to keep punishing them before putting them on my wife's bike!
The decals came off easily by hand and didn't leave any residue.
Was that the white or black decals ? Did you just scratch them off by hand ?
-
White decals. I just got a fingernail into an edge and the whole thing peeled up. Some spots left adhesive but I just used the peeled-off decal and dabbed those spots to pull up everything else.
Ended with two fresh wheels, no need for any solvents, cleaning chemicals, soap, or anything else.
-
Update after ~300km:
Nothing to say other than i am still a fan. Sometimes i hear some "ding"s but i think thats just the occasional gravel hitting the rim.
Im new to thick carbon wheels so i cannot say anything other than that i "think" i heard the same sounds with my 1000km on my Elite Ent 2.0
The Kore feel better made and look better tho. So thats my 2 cents.
-
White decals. I just got a fingernail into an edge and the whole thing peeled up. Some spots left adhesive but I just used the peeled-off decal and dabbed those spots to pull up everything else.
Ended with two fresh wheels, no need for any solvents, cleaning chemicals, soap, or anything else.
What how ? Even with a hair dryer I could not remove the decals...
-
Pardon guys, has anyone bought this model with pillar spokes? https://it.aliexpress.com/item/1005009497190160.html (https://s.click.aliexpress.com/e/_c4FFVEIf)
It seems like everyone goes for the carbon-spoke version.
-
Good luck with those. I think I lose 5 years of my life trying to mount these. Those PZero are great once mounted, but to get them on........ my lord.
i see your pzeros and raise you a challenge cx tyre
-
I recently received Cyclone wheelset and did about 300km so far.
The quality looks exceptional. Super nice hubs, bearings are buttery smooth, freehub body has bite guard and rubber seal. There was no grease on the bearings so you need to remember to but some yourself before installing the wheelset. Rims have really nice finish: raw carbon with matte clear coat that looks really nice in the sun. Decals look like they are under the clear coat. I wish the rims were a bit wider externally. You get 4 spare spokes and 2 tpu tubes in the box. No tubeless valves. All of the spare spokes are the same length. I asked the seller to install tubeless tape instead of a regular rim tape but they did a horrible job so I'll have to re-tape it anyway. Weight with a rim tape 1257g.
My friend also ordered a steel spoke 60mm version of the kore wheelset. Will report once he receives it.
-
What how ? Even with a hair dryer I could not remove the decals...
Maybe it's a MTB vs road difference? Idk I can only speak for the MTB wheelset I got, sorry man!
-
What how ? Even with a hair dryer I could not remove the decals...
I mentioned this before, these seem to be proper water applied. No removing these without rim damage. But they really do look good.
-
Suitable for my 95kg body weight?
-
Suitable for my 95kg body weight?
System weight limit is 120 kg, so bear this in mind.
-
I read in some other thread that there are super offers today, I think it's time to do a little upgrade then https://it.aliexpress.com/item/1005010280328183.html (https://s.click.aliexpress.com/e/_c3aMlnlF), among other things from what I understood there is also a discount if you use PayPal as payment method so will be €400 shipping included... crazy
-
Real shame they don’t sell the wheels without decal, the no decal wheels have an moq of 10. I love the specs but just don’t want that big ass decal.
-
Real shame they don’t sell the wheels without decal, the no decal wheels have an moq of 10. I love the specs but just don’t want that big ass decal.
Imho those decals look better irl than they do on the photos. Also they create a nice effect when spinning. You can opt for the black ones if you don't like loud white ones.
-
Imho those decals look better irl than they do on the photos. Also they create a nice effect when spinning. You can opt for the black ones if you don't like loud white ones.
I will second this. The decals just ADD to the appeal of these wheels.
-
https://aliexpress.com/item/1005011783775220.html
CSC now has something similarly priced.
Which one would you suggest?
-
https://aliexpress.com/item/1005011783775220.html
CSC now has something similarly priced.
Which one would you suggest?
I haven’t seen great feedback of CSC customers, based on customer service I’d go with the Kores, but the CSCs are even cheaper and lighter, which is crazy.
-
I haven’t seen great feedback of CSC customers, based on customer service I’d go with the Kores, but the CSCs are even cheaper and lighter, which is crazy.
CSC are shallower and narrower so not exactly 1 to 1 comparison
-
https://aliexpress.com/item/1005011783775220.html
CSC now has something similarly priced.
Which one would you suggest?
KORE. These CSC are nothing like the KORE other than being round.
And I have the CSC gravel wheelset which I enjoy.
-
Wow. I won't be ashamed to admit that at this price, I am tempted over a set of 55-60mm from the likes of XMCS/Serenade/Zen. Very much put off CSC by the poor reviews.
I am more and more tempted to try carbon spoked wheels...wonder if I can convince myself that these are "safe" (maybe better to say "good") enough!
-
KORE. These CSC are nothing like the KORE other than being round.
And I have the CSC gravel wheelset which I enjoy.
Whats the difference? Quality?
-
CSC are shallower and narrower so not exactly 1 to 1 comparison
Has your friend got the steel spoke version yet? In 50mm, cheaper by about USD100 over the carbon spoke. Only 50g in it weight-wise between the black decal Cyclone and equivalent "Top Gun" wheelset.
Only real compromise is potentially the Pillar spokes, as they're just standard round spokes not aero-bladed or anything fancy.
Something to think about over the next few days of the AliExpress sales anyway...
-
Has your friend got the steel spoke version yet? In 50mm, cheaper by about USD100 over the carbon spoke. Only 50g in it weight-wise between the black decal Cyclone and equivalent "Top Gun" wheelset.
Only real compromise is potentially the Pillar spokes, as they're just standard round spokes not aero-bladed or anything fancy.
Something to think about over the next few days of the AliExpress sales anyway...
My friend have received a 60mm version and they are looking good. 1360g with tape is insane for 60mm wheels for 350$. Hubs look almost identical to the carbon spoke version just a different flange and they are matte rather than gloss found on the cyclone. Rims are a bit too narrow for my liking 21int 28ext. 50mm version seem to have exactly the same rim as the cyclone
-
Agree, 24/30 is a good width and probably the minimum these days. That's what's on my road bike currently, but I'm thinking of moving them over to my new gravel build and getting a new road set.
At this price it's hard to say no. You wonder how they can do it for so cheap?
My theory is maybe the the bigger players are selling off cheap rims in bulk to finance development of more trendy, wider wheels...? Hard to believe, given the volume Kore have sold, these are simply QC rejects or "fallen off the back of a truck"
-
I've been stupid, bought a set of the Top Gun SL50's, ripped off and threw away the hub protector from my rear wheel... Anyone know what size replacement I'll need? I have zero bike knowledge
-
I don't know what the correct size is, try writing to the seller maybe they can help you otherwise try looking on alix there are sellers who have them in all sizes https://it.aliexpress.com/item/1005009037969428.html (https://s.click.aliexpress.com/e/_c3PXvRSZ)
-
Thank you very much :)
-
I haven’t seen great feedback of CSC customers, based on customer service I’d go with the Kores, but the CSCs are even cheaper and lighter, which is crazy.
I'm uncertain between CSC and Kore, the price on my door is pretty similar but I don't like the 50mm ok Kore and the white stickers so i'm pretty oriented on CSC 45mm
-
If you don’t like the white stickers , you can choose the black ones. For example, this one offers that option https://it.aliexpress.com/item/1005010280328183.html (https://s.click.aliexpress.com/e/_c4K9O2sv)
-
Well I know but I found the black ones are ugly too...
And as weightweener...the black ones weight some grams more! ::)
-
Lol they weight like sub 1200g, they are light as hell but I get it, I would also get the white ones hahaha (you can always remove the stickers if necessary) :)
-
I also wasn't convinced by the white decals originally but they do look kind of cool especially when spinning.
-
Lol they weight like sub 1200g, they are light as hell but I get it, I would also get the white ones hahaha (you can always remove the stickers if necessary) :)
Its been said before, these are NOT a simple peel off stickers
-
Fyi proprietary hubs, says the seller on Ali (for whatever its worth). Can't upgrade the spokes on the Top gun wheelset either, unfortunately.
I'm still tempted by the unbelievable price, but I just can't convince myself to buy them, knowing I'll probably just end up finding problems. There are some reports of excess flex on the rear I found on social media.
-
Tengo los dos juegos de ruedas, tanto las cyclone de radios de carbono como las topgun con radios de acero. La topgun es igual de rigida que cualquier otra rueda con radios de acero, la cyclone en cambio si que es mucho mas rigida como cualquier rueda con radios de carbono. Las topgun son las de 50mm de perfil 24mm interno y 30mm externo. Adjutno las fotos de peso de cada una con fondo de llanta instalado.
(https://i.postimg.cc/SYxvNP3t/IMG-1399.jpg) (https://postimg.cc/SYxvNP3t) (https://i.postimg.cc/PpxWLkfn/IMG-0596.jpg) (https://postimg.cc/PpxWLkfn)
-
Tengo los dos juegos de ruedas, tanto las cyclone de radios de carbono como las topgun con radios de acero. La topgun es igual de rigida que cualquier otra rueda con radios de acero, la cyclone en cambio si que es mucho mas rigida como cualquier rueda con radios de carbono. Las topgun son las de 50mm de perfil 24mm interno y 30mm externo. Adjutno las fotos de peso de cada una con fondo de llanta instalado.
(https://i.postimg.cc/SYxvNP3t/IMG-1399.jpg) (https://postimg.cc/SYxvNP3t) (https://i.postimg.cc/PpxWLkfn/IMG-0596.jpg) (https://postimg.cc/PpxWLkfn)
Very good, thank you!
Is it 30mm external all the way, or does it have some curve to it and increase a bit along the sidewall of the rim?
-
Need to update this. After about 2.5K km the front wheel needs to be trued. I am not a heavy rider at 75kg but the potholes did their thing. I wondered why I was getting a front wheel wobble during fast descent last week. Now I know.
-
I ordered the CSC @ 354€ with recent discount, I tryied to add Paypal additional discount but did not work.
Delivery 10 august!!! >:(
-
I ordered the CSC @ 354€ with recent discount, I tryied to add Paypal additional discount but did not work.
Delivery 10 august!!! >:(
If you are lucky. My CSC gravel wheels took nearly 3 months and came in via China post with shit ton of postage stamps on the box lol :)
-
I saw "top gun" stickered on a wheel on one of the pictures here. Is that avoidable?
-
I saw "top gun" stickered on a wheel on one of the pictures here. Is that avoidable?
I think the steel spoke wheels will have a sticker with Top Gun on there, the carbon spoked ones will have Cyclone. So yes, it’s avoidable.
-
Hello there,
Read the messages but still would like some advise from some of you guys.
Any reason to spend an extra 105usd/90eur for the carbon spokes and potentially 100g lighter?
Rims and hubs seem the same from what I can tell.
-
Hello there,
Read the messages but still would like some advise from some of you guys.
Any reason to spend an extra 105usd/90eur for the carbon spokes and potentially 100g lighter?
Rims and hubs seem the same from what I can tell.
How much is the 100g saving worth it to you? Other than that, the carbon spoke wheels will always feel stiffer or harsher (again your preference) and if you dont know maybe its worth a try?
-
Probably been asked already, but does anyone know where to get replacement ratchets for these hubs? Are they standard dtswiss replicas? Or something different?
-
(https://cdn.shopify.com/s/files/1/0989/7020/6529/files/KORE-Cyclone-50mm-Carbon-Spoke-Wheelset.jpg?v=1782359395)
(https://cdn.shopify.com/s/files/1/0989/7020/6529/files/KORE-Road-Carbon-Wheelset-50mm.jpg?v=1782359408)
Just to clarify a few common questions about the KORE CYCLONE Carbon Wheelset.
First, the price may be different on different platforms or in different countries. This is usually related to platform fees, shipping routes, transportation costs, and local tax rules. It is not only decided by the product itself. For most European areas, DDP shipping is usually supported. This means the amount paid at checkout normally includes shipping and taxes, so there is usually no extra customs duty to pay after delivery.
Second, the real weight of the white CYCLONE wheelset is around 1199g. The black version can be slightly heavier because of the extra paint and surface finish. Apart from the color and finish, both versions use the same carbon material, rim structure, carbon spokes, and hub system. Spare spokes and inner tubes are usually included for future maintenance.
About the logo, the CYCLONE logo is applied during the factory painting process. The rims are painted first, and then they are built into complete wheels and checked. Because of this process, this model cannot be made as a no-logo version at the moment. Removing, sanding, or damaging the original paint may affect the surface protection and may also affect the normal warranty.
Another common question is why some Chinese wheelsets may arrive with less visible grease in the bearings or freehub body. This is often related to export and air shipping regulations. Some oil-based materials may be restricted during export inspection or air transport. If too much grease is applied before shipping, the package may be delayed, returned, or rejected for air transport. Because of this, many wheelsets exported from China are not heavily lubricated before shipping. After receiving the wheels, riders can check the bearings and freehub body and add suitable grease according to their riding conditions and maintenance habits.
This is only to help explain some details about carbon wheelset production, shipping, and maintenance. Weight, structure, painting, maintenance, and logistics can all affect the final user experience.
https://korecyclehub.com/
-
Is your shop and the two selling on AliExpress all the same?
-
Just to clarify a few common questions about the KORE CYCLONE Carbon Wheelset.
First, the price may be different on different platforms or in different countries. This is usually related to platform fees, shipping routes, transportation costs, and local tax rules. It is not only decided by the product itself. For most European areas, DDP shipping is usually supported. This means the amount paid at checkout normally includes shipping and taxes, so there is usually no extra customs duty to pay after delivery.
Second, the real weight of the white CYCLONE wheelset is around 1199g. The black version can be slightly heavier because of the extra paint and surface finish. Apart from the color and finish, both versions use the same carbon material, rim structure, carbon spokes, and hub system. Spare spokes and inner tubes are usually included for future maintenance.
About the logo, the CYCLONE logo is applied during the factory painting process. The rims are painted first, and then they are built into complete wheels and checked. Because of this process, this model cannot be made as a no-logo version at the moment. Removing, sanding, or damaging the original paint may affect the surface protection and may also affect the normal warranty.
Another common question is why some Chinese wheelsets may arrive with less visible grease in the bearings or freehub body. This is often related to export and air shipping regulations. Some oil-based materials may be restricted during export inspection or air transport. If too much grease is applied before shipping, the package may be delayed, returned, or rejected for air transport. Because of this, many wheelsets exported from China are not heavily lubricated before shipping. After receiving the wheels, riders can check the bearings and freehub body and add suitable grease according to their riding conditions and maintenance habits.
This is only to help explain some details about carbon wheelset production, shipping, and maintenance. Weight, structure, painting, maintenance, and logistics can all affect the final user experience.
https://korecyclehub.com/
I've also had the Cyclones 36T HG white since yesterday, which weighed 1217 grams (taped) on my scale. They're already taped. The grease was really low, so I added my own, which also reduced the noise.
The box contains the 11-speed adapter ring and nothing else. There are NO spare spokes or inner tubes.
-
I had bought these https://it.aliexpress.com/item/1005010279504846.html (https://s.click.aliexpress.com/e/_c3K4wBfn) and had both the spokes and the inner tubes in TPU
-
I've also had the Cyclones 36T HG white since yesterday, which weighed 1217 grams (taped) on my scale. They're already taped. The grease was really low, so I added my own, which also reduced the noise.
The box contains the 11-speed adapter ring and nothing else. There are NO spare spokes or inner tubes.
Mine (arrived monday), ordered through Aliexpress did contain spare spokes and TPU tubes
-
Mine arrived with white logo and painted (1249g). A combination i would never have picket. Still in discussion with seller.
-
I am still dealing with the KORE store via Ali on my issue. The latest is they want me to provide proof (video) of the front wheel shaking when I am at speed, which makes me think I am not going to get anywhere here. I was about to ask if they are going to cover the medical bill when I crush but decided to skip that comment.
-
Mine arrived today, 1191 grams including tubeless tape. Zoom store supplied me with a tubeless tape job on request, which was not bad but not great either. Seem quite true, yet to test them on the road. For now, I’d say the Zoom store on AliExpress has provided me excellent customer service. Yet to notice any issues. Will update when I’ve ridden them a bit.
-
Mine arrived today, 1191 grams including tubeless tape. Zoom store supplied me with a tubeless tape job on request, which was not bad but not great either. Seem quite true, yet to test them on the road. For now, I’d say the Zoom store on AliExpress has provided me excellent customer service. Yet to notice any issues. Will update when I’ve ridden them a bit.
Does Zoom's 52$ shipping work tax free to Europe? Or what do they charge in addition?
-
Does Zoom's 52$ shipping work tax free to Europe? Or what do they charge in addition?
EU customer here. They made me choose the Aliexpress standard shipping, which costs about €66 currently. They delivered a symbolic package via the standard Ali shipping which contained 1 tpu tube. They said I could reject it, because there was a customs fee of €11, which I didn’t end up doing, because I don’t like landfill. The wheelset came with DPD, no taxes or questions asked there. They are very responsive to questions, had great communication with them. Sometimes so nice that it actually looked like they were going to scam me. This method seems a bit sketchy, but ended up being all good. 100% recommend. So; Pick AliExpress standard shipping and NOT aliexpress large goods by land or DHL. Ordered on 9th of june, shipped 13th delivered 25th to NL.
-
I've also had the Cyclones 36T HG white since yesterday, which weighed 1217 grams (taped) on my scale. They're already taped. The grease was really low, so I added my own, which also reduced the noise.
The box contains the 11-speed adapter ring and nothing else. There are NO spare spokes or inner tubes.
Did you purchase it from Temu?
If it was purchased from Temu, the package is shipped through their transit warehouse, so spare spokes and inner tubes may not be included.
If you purchased from AliExpress, our official website, or eBay, you can contact the seller directly and ask them to help provide these accessories.
Thank you for your understanding.
-
Is your shop and the two selling on AliExpress all the same?
AliExpress, Temu, Ozon, and eBay are all official direct-sales channels operated by KORE.
At the moment, KORE wheelsets have not been authorized to any other third-party stores or sellers.
So if you purchase from these official channels, you can contact the seller directly for after-sales support or accessories.
-
EU customer here. They made me choose the Aliexpress standard shipping, which costs about €66 currently. They delivered a symbolic package via the standard Ali shipping which contained 1 tpu tube. They said I could reject it, because there was a customs fee of €11, which I didn’t end up doing, because I don’t like landfill. The wheelset came with DPD, no taxes or questions asked there. They are very responsive to questions, had great communication with them. Sometimes so nice that it actually looked like they were going to scam me. This method seems a bit sketchy, but ended up being all good. 100% recommend. So; Pick AliExpress standard shipping and NOT aliexpress large goods by land or DHL. Ordered on 9th of june, shipped 13th delivered 25th to NL.
Yes, I suggest contacting the seller before purchasing.
Their recommended shipping is usually DDP / tax-included, so you normally don’t need to pay extra customs duties. Just confirm the details with the seller before ordering.
-
I've been stupid, bought a set of the Top Gun SL50's, ripped off and threw away the hub protector from my rear wheel... Anyone know what size replacement I'll need? I have zero bike knowledge
You can contact the store where you purchased the wheelset directly.
They will guide you through the steps and can also provide a video to help you understand how to install or replace the part correctly.
-
Did you purchase it from Temu?
If it was purchased from Temu, the package is shipped through their transit warehouse, so spare spokes and inner tubes may not be included.
If you purchased from AliExpress, our official website, or eBay, you can contact the seller directly and ask them to help provide these accessories.
Thank you for your understanding.
I purchased from Temu, Kinan Shop.
Honestly, I'm disappointed for two reasons:
1) they're missing spare spokes.
2) buying directly from Kone would have saved me about €50, including DPD shipping;
How can I get spare spokes?
Thank you
-
Go get the on Alix pls
-
Just an update here. The seller has refunded me $100 to cover some cost of the repair of the wheel. I was under the impression they would cover the total cost. But this is the cost of getting stuff from across the world and hoping nothing bad happens. I wonder whats going to happen if there are other issues.
-
I purchased from Temu, Kinan Shop.
Honestly, I'm disappointed for two reasons:
1) they're missing spare spokes.
2) buying directly from Kone would have saved me about €50, including DPD shipping;
How can I get spare spokes?
Thank you
Yes, my friend. In the future, you can compare the prices between our official website, Temu, and AliExpress. You can simply choose the platform with the best price advantage.
The shipping time is basically the same.
Regarding the spare spokes, we usually recommend contacting the seller before placing the order and asking whether spare spokes can be included. In most cases, we can provide spare spokes for free.
For your situation, please contact the Temu seller first, and they will help arrange the spare spokes for you.
-
Go get the on Alix pls
You can check and compare the prices on different platforms before purchasing.
Whether it is our official website, Temu, AliExpress, or other e-commerce platforms, the products and shipping service are the same. You can simply choose the platform that offers the best price advantage for you.
-
Regarding the vibration or wobble issue, if we only have a written description, it is very difficult for the seller to confirm the exact cause.
That is why we need a clear video. It will help us better judge whether the issue is caused by the wheelset itself, the tire, the installation, or another factor.
Please don’t worry — the after-sales team will continue to help you handle this issue. We will communicate with you and try to find a solution that is acceptable for both sides.
-
I bought the black cyclone wheelset.
Came very well packed, with 2 30gr tpu and spare spokes.
Weight: 1258 with the tubeless tape.
I mounted a gp5000 32mm with the tpu tubes that came with the wheels.
Today I did a 100km first ride. They feel much more responsive than my Velobuild wavy wheels (I saved almost 500grs with the Kore).
But it was a group easy ride so I didn´t sprint or anything simmilar.
I´m very satisfied. I don´t think you can get anything better at this price point.
-
More than +100e for shipping, is that normal for EU customer ?
-
I would say it's normal
-
More than +100e for shipping, is that normal for EU customer ?
Hello, you can also check our official website.
For EU customers, the price on our official website already includes all fees, so it is usually more friendly and more cost-effective for European countries.
You can also compare prices across different platforms before placing an order. Because each platform may have different coupons or promotions, the final price may not always be the same. We suggest checking multiple platforms and choosing the one with the best price for you.
-
More than +100e for shipping, is that normal for EU customer ?
Is a shipping cost very similar to other chinese carbon wheels brand; shipping + custom fee included (DPD, seller shipping method).
On aliexpress I paid around 86 euro with Elitewheels and 132 euro with Otvto for shipping+custom.
-
A question for KORECycling (or anyone else who knows the answer 8)):
Is it possible to use a Shimano MicroSpline compatible freehub body on the Top-Gun wheelsets hub?
Thanks.
-
Can someone confirm the system weight limit for Top-Gun wheelset?
Is it really 100kg?
-
A question for KORECycling (or anyone else who knows the answer 8)):
Is it possible to use a Shimano MicroSpline compatible freehub body on the Top-Gun wheelsets hub?
Thanks.
I asked them on Aliexpress and they said that they provide MS freehub for free if you ask. (Note that this was for their gravel set, but should be the same either way)
-
I asked them on Aliexpress and they said that they provide MS freehub for free if you ask. (Note that this was for their gravel set, but should be the same either way)
In my case I alrready have the wheels, two sets in fact, 50mm e 60mm, on different bikes. On these "Top-Gun" models, the hubs are the same. Do you know if the hub in that gravel model is the same too?
-
Hey guys,
Got a peculiar issue with my freehub, thought you might have an insight on this.
So the thing is, a weird subtle grinding-like sound is occasionally coming out of the freehub. First I thought it’s bearings, but I replaced them, and the unwanted sound is still there. I have no idea what this might be, as it is not a constant thing, but it just ocassionally comes up. I think it is more prevalent when pedalling a bit lighter, it really appears at random as it seems. It’s driving me crazy. One day it just startet and does not want to fuck off.
Could it be the ratchet being too sticky? I’ve added quite a lot of greese inside the hub. Nothing is loose, bearings are still smooth at the back, I am a bit desperate at this point. I am 100% sure it’s the freehub, but just cannot locate the source.
Any ideas are welcomed! Thanks!
-
Im no expert on wheels, but I would completely disassemble to the hub, clean it all out and slowly add a bit of grease to the ratchets. I think that maybe you went a bit "over board" there with the grease
-
Im no expert on wheels, but I would completely disassemble to the hub, clean it all out and slowly add a bit of grease to the ratchets. I think that maybe you went a bit "over board" there with the grease
Also thought I went a bit too crazy with the grease, so I did clean the whole hub, but the problem is still there. I tried to record the sound on my phone while riding yesterday, have a look. Pls excuse my hairy legs haha. The weird grind sound starts at around 0:05.
https://youtube.com/shorts/7ud0GU-VWqQ?is=jJ3IX4PhzMazNnMC (https://youtube.com/shorts/7ud0GU-VWqQ?is=jJ3IX4PhzMazNnMC)
I am running out of ideas. My last try will be to check if the sleeve in the freehub isn’t way too loose, but that is literally the last thing I can think of.
-
it seems the problem is the in the cassette body bearing, not in the hub body
Probably it's the external bearing
-
it seems the problem is the in the cassette body bearing, not in the hub body
Probably it's the external bearing
Cannot be, those were replaced recently.
-
Cannot be, those were replaced recently.
Have you tried any other wheel in that bike? Couldn´t be maybe the RD jockey wheels? Or some particular sprocket?
Is it noisy while pedaling only or coasting too?
I don´t know, just brainstorming.
Is the rd hanger tight?
-
Have you tried any other wheel in that bike?
Also thought about this before. Already swapped my rear wheel for the old one, aaand the noise was instantly gone ;D I am 100% sure it’s the freehub
-
My KORE Cyclone CRACKED after 500km of road riding.
never flatted, 31-32mm tyres, always on-road, 85kg and with tubes. Sent images to KORE and they blamed the crack from a rock strike. They also rested on their 2000 sales and said they test EVERY wheel for safety (what ever that means?) Told me to buy a new rim and build it back up myself. Crap customer service and questionable rims
-
To be honest, it does look like you hit a pothole, or went over train tracks too hard. I dont think any rim would survive this. At this point be happy you didnt have $2000 rims on your bike. Ask them to sell you just one complete wheel as a crush replacement, at a discount.
-
To be honest, it does look like you hit a pothole, or went over train tracks too hard. I dont think any rim would survive this. At this point be happy you didnt have $2000 rims on your bike. Ask them to sell you just one complete wheel as a crush replacement, at a discount.
To be honest, i wish that was the case, then i wouldn't need to be on here bitching about how crap the product is. Last carbon wheelset was around 1.5k and still haven't died after 8yrs. Is the market accepting of riding wheels that will catastrophically fail if hit by a crack in the road or a pebble? inflated with a digi pump each ride, tubed and with wider tyres than the external rim width. I guess that is why the price is low as they don't batch test regularly. anyone know who the rim manufacturer is?
UPDATE: Kore replied saying the factory only tests for 'Radial static loading' and Lateral Rigidity' sounds like they skip on the impact resistance test.
-
So when did it crack? During the ride? in your garage?
-
Hey guys,
Got a peculiar issue with my freehub, thought you might have an insight on this.
So the thing is, a weird subtle grinding-like sound is occasionally coming out of the freehub. First I thought it’s bearings, but I replaced them, and the unwanted sound is still there. I have no idea what this might be, as it is not a constant thing, but it just ocassionally comes up. I think it is more prevalent when pedalling a bit lighter, it really appears at random as it seems. It’s driving me crazy. One day it just startet and does not want to fuck off.
Could it be the ratchet being too sticky? I’ve added quite a lot of greese inside the hub. Nothing is loose, bearings are still smooth at the back, I am a bit desperate at this point. I am 100% sure it’s the freehub, but just cannot locate the source.
Any ideas are welcomed! Thanks!
Did you check the free hub bearings or the wheel bearings? Both?
I have a set of Cyclones on the way. The new bike hasn't been ridden yet. I'm thinking of selling the stock wheels, chainrings, and even chain. I don't want to mar anything by riding it.
-
To be honest, i wish that was the case, then i wouldn't need to be on here bitching about how crap the product is. Last carbon wheelset was around 1.5k and still haven't died after 8yrs. Is the market accepting of riding wheels that will catastrophically fail if hit by a crack in the road or a pebble? inflated with a digi pump each ride, tubed and with wider tyres than the external rim width. I guess that is why the price is low as they don't batch test regularly. anyone know who the rim manufacturer is?
UPDATE: Kore replied saying the factory only tests for 'Radial static loading' and Lateral Rigidity' sounds like they skip on the impact resistance test.
I don't think that any manufacture checks every wheel sold for impact resistance. Kore does show their wheel impact resistance testing - https://www.facebook.com/100017060653452/videos/kore-wheelset-road-testreal-performance-comes-from-real-ridingwe-tested-the-kore/2096896794244073/
-
I didn't post about my personal experience with my sets.
But I cracked both wheels off my first cyclone wheelset on two huge potholes in the same ride at different times.
I thought nothing of it has I didn't flat and wheels stayed true.
It was not perfect dealing with CS but I'd still give it a 4.5/5 as I also thought that I had only broken 1 wheel so reached out on two different occassion to them for the cracks.
They only charged me delivery fee's for my replacement and have since done over 4000 km on the second set with no issue.
-
AliExpress, Temu, Ozon, and eBay are all official direct-sales channels operated by KORE.
At the moment, KORE wheelsets have not been authorized to any other third-party stores or sellers.
So if you purchase from these official channels, you can contact the seller directly for after-sales support or accessories.
I'm from the Philippines, where can I purchase it online?
I think there's Tiktok shop, Lazada and Shopee here.
-
My KORE Cyclone CRACKED after 500km of road riding.
never flatted, 31-32mm tyres, always on-road, 85kg and with tubes. Sent images to KORE and they blamed the crack from a rock strike. They also rested on their 2000 sales and said they test EVERY wheel for safety (what ever that means?) Told me to buy a new rim and build it back up myself. Crap customer service and questionable rims
Hi everyone,
First of all, based on the photos and information provided, we can confirm that the damage on this wheel appears to have been caused by an external impact or a serious collision, rather than a manufacturing defect.
We would also like to clarify that we have never refused responsibility or ignored customer concerns. Before every wheelset leaves our factory, it goes through three separate inspection procedures to ensure that it meets our quality standards. We do not ship wheels with known defects or quality issues.
Regarding the testing process mentioned in the discussion, we do have comprehensive inspection procedures for our wheelsets, including structural and performance checks before shipping. You can see some examples of our inspection process here:
https://www.youtube.com/shorts/fX9MZCKySlU
https://www.youtube.com/shorts/VqsSIgvmI_E
https://www.youtube.com/shorts/Ak4BGuw09Pc
We also want to clarify that we have never used our sales numbers as an excuse or as a way to avoid responsibility. Sales volume does not determine whether a single case should be reviewed — every customer issue is taken seriously.
Regarding the communication history, we are happy to provide the complete conversation record if necessary. We believe that showing only one image or a partial conversation can easily lead to misunderstandings about the situation.
After reviewing this case, we also offered a solution and arranged support for the customer, including providing a replacement wheelset. However, this follow-up information was not shared in the discussion, which gives an incomplete picture of how the issue was handled.
We respect all customer feedback, including negative experiences, because they help us improve. At the same time, we hope that discussions can include the full context so that everyone can have a fair understanding of the situation.
Thank you.
Leslie
KORE Cycling
-
Hi everyone,
First of all, based on the photos and information provided, we can confirm that the damage on this wheel appears to have been caused by an external impact or a serious collision, rather than a manufacturing defect.
We would also like to clarify that we have never refused responsibility or ignored customer concerns. Before every wheelset leaves our factory, it goes through three separate inspection procedures to ensure that it meets our quality standards. We do not ship wheels with known defects or quality issues.
Regarding the testing process mentioned in the discussion, we do have comprehensive inspection procedures for our wheelsets, including structural and performance checks before shipping. You can see some examples of our inspection process here:
https://www.youtube.com/shorts/fX9MZCKySlU
https://www.youtube.com/shorts/VqsSIgvmI_E
https://www.youtube.com/shorts/Ak4BGuw09Pc
We also want to clarify that we have never used our sales numbers as an excuse or as a way to avoid responsibility. Sales volume does not determine whether a single case should be reviewed — every customer issue is taken seriously.
Regarding the communication history, we are happy to provide the complete conversation record if necessary. We believe that showing only one image or a partial conversation can easily lead to misunderstandings about the situation.
After reviewing this case, we also offered a solution and arranged support for the customer, including providing a replacement wheelset. However, this follow-up information was not shared in the discussion, which gives an incomplete picture of how the issue was handled.
We respect all customer feedback, including negative experiences, because they help us improve. At the same time, we hope that discussions can include the full context so that everyone can have a fair understanding of the situation.
Thank you.
Leslie
KORE Cycling
Bravo!!!! Good to see a rep properly engaging and backing their product.
-
Just wanted to share a disappointing experience with KORE’s Zoom Store on AliExpress.
I bought a Titan 50 gravel wheelset through the AliExpress Trial section at the price offered to me there and paid for the order normally.
Shortly afterwards, Zoom Store asked me to cancel because the wheelset was supposedly out of stock. A little later the same wheelset was available again, so I asked them about it.
They then admitted that the actual problem was the price:
“At this discounted price, I can't even buy two rims.”
and later:
“It was my mistake, I'm sorry, but I can't ship the item to you.”
I’m not asking KORE for any additional discount. I simply bought the product through an AliExpress promotion at the price AliExpress offered me, and I would expect the order to be honoured.
I have refused to cancel the order from my side and AliExpress has now escalated the case to senior support.
Since @KORECycling has previously confirmed here that Zoom and the other AliExpress/Temu/eBay stores are KORE’s own sales channels rather than third-party sellers, I thought this was worth sharing in the KORE thread.
Hopefully KORE can look into what happened here. I was actually quite excited to try the Titan 50, so this has been a pretty disappointing first experience with the brand.
I’ll update the thread once I hear back from AliExpress.
-
I don't think that any manufacture checks every wheel sold for impact resistance. Kore does show their wheel impact resistance testing - https://www.facebook.com/100017060653452/videos/kore-wheelset-road-testreal-performance-comes-from-real-ridingwe-tested-the-kore/2096896794244073/
I agree, you can't test every wheel for impact without subjecting it to an impact. Then I wouldn't want to buy a wheel that has already been impacted by a 200lb weight dropped on it.
I also agree that the photos show that the damage is due to impact with something. I don't think any manufacturer will warranty a rim due to impact. Some may offer crash discount, but many don't.
-
Hello everyone,
I recently bought a wheelset from AliExpress. After removing the rim tape, I noticed that some of the transparent clear coat seems to be coming off the rim. I contacted the seller’s support team and they refunded me 10%.
Has anyone else experienced this issue? Since it’s only on the inside of the rim, I assume it doesn’t affect safety, but I’d be interested to hear if this is common.
Thanks!