Happy Holidays!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Anyone a link to plugs for the unused wholes in the frame if AXS is used, derailleur and front derailleur? Ordered two kinds, both don't fit, so a proven solution would really help me ... Thanks!
I’ve been riding for 20 years and thought I had a good grasp on my fit.
Tried myvelofit last week and it immediately said my saddle was 5cm too high
It’s been a crazy shift in feeling - I’ve settled around 3cm lower at the minute….
My concern with that is the double cost as I'll need another once the bike is built and funds are a little tight. Obviously buying the wrong frame is also more expensive. The 56 is quite a lot smaller which scares me!
Finished my build last week and had a ride, WOW. I'm so in love with this build already. I'm coming from a 2015 endurance Pinarello and this feels SO much better. I received the frame early May, so I was hoping the new seat post grip and wedge would solve any slipping issues. It did not...took about 10k but slipped down. Other issue was the saddle rail bolts, max torque for the carbon rails was not nearly enough and it was tilting easily. Road side fix and I was able to do another 85k without issue tho. Some notes from my build in case others review this thread and take the advice posted along the way.
1. Park Tool BB 69.4 does NOT fit the CEMA ceramic BB LightCarbon offers. Standard Hollowtech II tool does however.
2. A titanium bolt was mentioned a few pages back for the seat post wedge. The bolt specified was too narrow for the wedge that came with my frame. Not sure if LC change the wedge or not...
3. This is me being a n00b, but the crown race is integrated into the fork. I was all worried it was missing from my kit.
The rest seemed all good for me. Brake mounts were clean and calipers went on straight and easy. BB shell was flawless and BB went in super easy. All in all just a fantastic frame.
my frame is done and painted. i got photos of not my actual door, but the door i will get, which is indeed version3. the door lever is now closed in the down position
I assume that comes with the new door. It would be weird if they shipped a new door without the parts that need to be replaced.
This morning I received an email with the track and trace code for my V3 version of the storage door from Wendy. I almost lost the door 3 times caused by the lever sliding down due to vibrations. My frame is from december 2025
I asked Joy for a picture of the new cover mechanism - I added it in attachment.
Does anyone have detailed pictures or a full kit to judge how much you can shove in the storage?I'm using two storage bags stuffed with:
Hey! I should receive my frame tomorrow ! Quick question, when I will have to cut the fork, should I cut it 3mm under the top of the stem ?The instructions sent by LC state 4-5mm.
Thanks
Leaning towards the LCR018 in this silver chrome to black gradient. Planning to pair it with Serenade 50mm wheels (1318g) and 105 Di2 when I find a good deal. This visual shows the goal. I’m aiming for a total weight around 8 kg. Do you think it’s realistic with this setup?
