yes they are and you should do it because they are a bit loose on the ends.

does anyone have some infos about the prices for the HBR18? Couldnt find anything online

For those who are interested in wheels: as i mentioned in an other post i wanted to give my old 2015 Diverge a new wheelset. And because i´ll have to make some changes to the hubs to fit my bike i wanted to go on the cheap side. In CSC i found a supplier with the right set (for me).
I ordered direct from their website the following set: CSC45CT35D272
https://www.carbonspeedcycle.com/d272eu.html
I payed around 405,-€ with shipping to Germany.

Here are the Specs:
45x35mm, 29mm  (inner width), Pillar Wing20 Spokes, Steel bearing

The wheels look pretty decent and i mounted the following tires to check clearince in the frame:

Schwalbe G One Pro 622x35 measures 38.2 mm
Schwalbe G One Pro 622x40 measures 42 mm

Michelin Pro5 700x35 messures 37.9 mm

I had to change the endcaps at the rear hub to make it a 12x135. So i bought a set from DT-Swiss (HWGXXX0007569S) and they fit perfectly.
https://r2-bike.com/DT-SWISS-Umruestkit-straightpull-Naben-auf-12x135mm-Steckachse-Ratchet-System-Shimano-11-fach-Road
And with the new caps the wheel was about 4mm off center so i had to correct the dish. Took me about 10 minutes.

Next i´ll have to exchange the front hub for a 15x100. That will come from Goldix

And now some pictures to see how the tires sit on a 35mm rim

Cheers

Trolo

...as soon as the frontwheel is ready i´ll say something about ride quality

Do you know if the fork offset/trail numbers are correct on these? It would still mean that they'd ride very differently in reality.

Unfortunately i cant help you here. i just have the numbers from the drawing from the first post of this thread and the numbers on the website of bikeinsights. so we have to wait for an official announcement from mondince.
but yes, from the numbers we have, the open wi.de 2.0 and the fm356 should handle different.

Hi! I have Carbonda CFR505 gravel bike in size M which have 597,8 mm front-center. I have 165 mm crank and 700x40 tires and I have overlap on veeeeeeery rare occasions and it don’t bother me at all. Front-center distance is longer on this frame so i hope overlap will be less noticeble.

Yeah I think you're right. I checked my 2015 Diverge with which i never had problems and that's pretty short with 607 front center. Thanks for replying

I ordered a size 58 and that was the last size they were making and that is the time frame I was given.

How did you order. Do you have a direct contact to mondince? On their website is nothing to find about this frame...

Our hubs can be directly switched between QR and thru-axle. Simply replace the side caps.

Thanks @Matter for the answer. Actually i need side caps for through axle 12x135, not QR. If possible that would be really great.
Otherwise i´ll have to turn on the lathe again