Quote from: Vipassana on April 12, 2021, 01:04:29 PM
Thank you for this post! You have built basically the exact spec that I am planning to build. The only difference I'm considering at this moment is to use the FM 909 frame. But if I go with the FM 936, my bike will be identical to yours except for color, blipbox, saddle. Maybe tires too of course. I was very hopeful to stay well under 10.5 kg, and you've just shown me that this can be done. And even with some nice goodies like AXS and a power meter.

I am coming from a hard tail that I have been riding for 7 years now. So moving to a full suspension with modern geometry is going to be mind-blowing.

What ?!? You don't like my saddle ? It is very comfy you know
Coming from the same hardtail years as me. Mind-blown you'll be for sure !

Quote from: carbonazza on April 12, 2021, 01:51:33 PM
What ?!? You don't like my saddle ? It is very comfy you know
Coming from the same hardtail years as me. Mind-blown you'll be for sure !

This is my saddle of choice:
https://a.aliexpress.com/_mPyYPrD

However, the recent ones I've received seem to have been made cheaper and are more prone to cracking in crashes or after prolonged riding. It's a shame because the original version was excellent. At least for me. Several century rides without issue.

I recently switched to this one and have been impressed:
https://a.aliexpress.com/_mOQO5HN

Quote from: Vipassana on April 12, 2021, 02:32:21 PM
https://a.aliexpress.com/_mPyYPrD

I tried the plastic one, long time ago, but it did break very fast.
A pity they don't do them with a stronger material.
Maybe the recent branded 3D printed ones offer the same comfort and resist better.

Quote from: Vipassana on April 12, 2021, 02:32:21 PM
https://a.aliexpress.com/_mOQO5HN

I tried this one too, but it wasn't my shape.

All my bikes have this "piece of art" now:
https://a.aliexpress.com/_mKX9LWP

Quote from: carbonazza on April 12, 2021, 02:56:24 PM
I tried the plastic one, long time ago, but it did break very fast.
A pity they don't do them with a stronger material.
Maybe the recent branded 3D printed ones offer the same comfort and resist better.
I tried this one too, but it wasn't my shape.

All my bikes have this "piece of art" now:
https://a.aliexpress.com/_mKX9LWP

I couldn't remember who recommended this one but I tried it and WOW, was it painful.

Quote from: RobertRinAustin on April 12, 2021, 08:47:09 PM
I couldn't remember who recommended this one but I tried it and WOW, was it painful.

My bet, it's me  ... sorry.
I buy it. If you don't do anything with it, and can send it to a friend in Phoenix AZ(from Austin right?).
PM me.

My Carbonda FM 936 project starts today.

Cleaned after first ride (80 km / 1800 hm).
First impressions 

What's the maximum rear travel you can get out of this frame?

Quote from: Arno Knell on April 18, 2021, 04:27:30 AM
Cleaned after first ride (80 km / 1800 hm).
First impressions 

Looks awesome!
So you are happy with it then lol

Are you all having a Torx 30 axle at the rear ?
This is hardly available on a multi-tool.
It kind of works with a Hex 6 but won't last...
Or maybe it is designed for something like this: https://soshanger.com/148x12x10-T30-Rear-axle-SCOTT ?

If someone changed their axle, could you share the reference ?

When removing the wheel, the derailleur hanger moves down although tightened.
And needs to be moved up to allow the axle to reach the nut through it.
Anyone noted this trouble ?

My DIY Chainstay Protector.
Bouncy balls and Mastik Tape

Hahahahha that's the most inventive thing i've seen for a while. Personally, I just get harribo and some glue and stick them on!!

Quote from: carbonazza on April 20, 2021, 03:28:18 AM
Are you all having a Torx 30 axle at the rear ?
This is hardly available on a multi-tool.
It kind of works with a Hex 6 but won't last...
Or maybe it is designed for something like this: https://soshanger.com/148x12x10-T30-Rear-axle-SCOTT ?

If someone changed their axle, could you share the reference ?

My frame came with a Hex 6 Axle. Definitely no Torx.
In case you need it, marking is: 180 mm M12 * P1.5 * L16.5

Quote
When removing the wheel, the derailleur hanger moves down although tightened.
And needs to be moved up to allow the axle to reach the nut through it.
Anyone noted this trouble ?

Nope, no movement on my derailleur hanger.

Sizing Question
I am 179 CM (5'10.5") and fall right on the line for a M/L. What would you guys suggest? I am coming off a 1995  26' Proflex 855 size large- so zero experience  with the modern GEO.

Quote from: steveP on April 20, 2021, 05:08:21 PM
Sizing Question
I am 179 CM (5'10.5") and fall right on the line for a M/L. What would you guys suggest? I am coming off a 1995  26' Proflex 855 size large- so zero experience  with the modern GEO.

I'd suggest a medium. I'm 6'1" on a large and this bike runs long. I think you'll be fine with a medium. It will be a major change from your Proflex which was my dream bike back in 95.