[img]My problem seems to be that the height of the c-ring is too small. When I tighten the top cap, the dust cap gets pressed down onto the head tube from my frame, and not onto the c-ring, which results in my handlebars getting stuck and unable to steer...
In order to fix this problem I ordered some microspacers to put onto the c-ring (see picture).
I had to cut the microspacers though, so they would fit the C-form from the C-ring.
This way I can tighten the top cap without the dust cover getting pressed down onto the top of the head tube.
I wonder if the problem lies with the C-ring (height too low), or the top bearing sitting too low into the head tube ...
Anyhow, I have a bad feeling about the (cut) microspacers and the c-ring, so I would rather have a new C-ring which requires no microspacers. Anyone now if the latest update for the C-ring changed anything on the dimension (height)?
edit: another possible cause of the problem might be the dimensions of the bearings or maybe top and bottom bearing got switched? Anyone know if the top and bottom bearing have other dimensions and could be installed incorrectly (switched)?