Xiamen Carbon Speed 10 years anniversary special promotion

[Sander2177]

Anyone looking at shallower depths 35/40? Interested to see the weight with t
Carbon spokes and 20H/20H on carbon spokes

[PeterXu]

26mm internal 35mm depth super light climb wheels, 1090g/pair

D35CU-33 T1100 rims 20/20H UD paintless
Carbon Speed in-house hubs titanium color 20/20H 54T rachets TPI ceramic bearings center lock straight pull for 100*12/142*12 HG driver, 3.8mm carbon spokes

[TommyGun]

Are carbon spokes models available also with other hubs (that are also designes for carbon spokes specificly)?

[PeterXu]

Are carbon spokes models available also with other hubs (that are also designes for carbon spokes specificly)?

There are some companies selling carbon spokes with regular nipple end, but we don't, since those spokes without stable quality.

But we can build T1100 version rims with regular stainless spokes.
 Attached pictures are D50CU-33 T1100 rims 24/24H built with Sapim CX-Ray spokes and in-house hubs 36T rachets enduro steel bearings with Shimano HG driver

[PeterXu]

Anyone looking at shallower depths 35/40? Interested to see the weight with t
Carbon spokes and 20H/20H on carbon spokes

The weight would be around 1100-1110g/pair

[TommyGun]

My interest is only with carbon spokes (50mm, 33ext., 3,8mm carbon spokes). And I know that is way better to have the hub, that is specially made for carbon spokes.
Can you share any technical info regarding your carbon spoke hubs? Like which type and sizes bearings are used, weight,...
Do you maybe also have this hub with 24 spokes (rear only) or is it only 20 spoke option?

[DrRoB]

There are some companies selling carbon spokes with regular nipple end, but we don't, since those spokes without stable quality.

But we can build T1100 version rims with regular stainless spokes.
 Attached pictures are D50CU-33 T1100 rims 24/24H built with Sapim CX-Ray spokes and in-house hubs 36T rachets enduro steel bearings with Shimano HG driver

I would be very interested in the wheelset mentioned above. How much would thiswheelset exactly cost including shipping to Germany? Kind regards
Robert

[Daviddavieboy]

Ordered a set of wavy gravel wheels on the 13th and they have been shipped on the 1st. 24mm internal should plump up the 32mm gp5000 AS to near 35mm. Hope they fit the frame !

https://www.xmcarbonspeed.com/Productinfo.asp?f=1657

Landed here in Atlantic Canada yesterday (March 6th) safe and sound. Wheels were packaged well in a wheel specific box and look perfect.
FWIW I have bought wheels off ALI before and they just came in a large box stuffed with foam and these had cardboard separators inside the box and were in foam wheel bags and nothing else included although I did purchase a XDR freehub along with the included Shimano one.

For reference in my frame still has lots of clearance as I plan to use 32 mm tires.

[PeterXu]

24mm internal width 50mm and 60mm depths rims would be available early April.

[notnow]

24mm internal width 50mm and 60mm depths rims would be available early April.

weight on those?

[PeterXu]

weight on those?

T1100 version UD paintless finish
50-31 : 375+/-10g
60-31: 420+/-10g

[Sander2177]

T1100 version UD paintless finish
50-31 : 375+/-10g
60-31: 420+/-10g

Look Great Peter! Look superlight!
XM Doing quality work are you working on anything shallower?

[planet_sammy]

Does anyone also have the tubeless valves from XMC and tried to fill the milk directly through the valve?

[Sander2177]

I ordered a pair of 65mm deep D65CU-33 w/ 5.0mm spokes, plain gloss finish, no decals. 26mm int/33m ext

Except I chose the T800 version over the lighter T1100 this time. Ultra-light wheels at this depth for myself is asking for trouble.

Weight should be around 1460g which is still lighter than comparable Magene, Winspace, Elite Wheels. Yet wider.

Any idea what these would be ultralight? Like 1300g

[toxin]

ultralight 65mm rims are 475g, do the math