Author Topic: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?  (Read 110498 times)

Sander2177

Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
« Reply #540 on: April 02, 2025, 08:08:32 AM »
Rebel

Like TAN TAN I contacted by WhatsApp
I can give you number if you want or email but have been chatting on WhatsApp
No website
Names Angler: +8618850007287
Looking at 2-3 weeks before sent
SL8 Custom Green Over Naked Carbon 54CM 6.11kgs RhinosWorkShop Build
2nd Bike in planning not sure what yet!

Rebel_Yell


Sander2177

Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
« Reply #542 on: April 02, 2025, 05:49:17 PM »
attached the mia in size 56.

Is that UD Black matte or black matte?
Hows the build going?
SL8 Custom Green Over Naked Carbon 54CM 6.11kgs RhinosWorkShop Build
2nd Bike in planning not sure what yet!

Sander2177

Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
« Reply #543 on: April 02, 2025, 06:31:31 PM »
Just got info that my frame is finised and shipped out. I ordered/paid mine on the 16th of January. Also got some pics from the Tantan guys before they packed and shiped it out.  :)

dovh did they send you paint sample via email for this colour?
SL8 Custom Green Over Naked Carbon 54CM 6.11kgs RhinosWorkShop Build
2nd Bike in planning not sure what yet!

Sander2177

Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
« Reply #544 on: April 02, 2025, 06:35:53 PM »
At tan tan, they call this "UD matte". That's also what I ordered :) They also sent some exemplary photos, which looked good...

Can you post the photos they sent?
SL8 Custom Green Over Naked Carbon 54CM 6.11kgs RhinosWorkShop Build
2nd Bike in planning not sure what yet!

makl

Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
« Reply #545 on: April 03, 2025, 06:36:22 AM »
Sure. Examples are raw, "UD-matte" and "UD-glossy".

Sander2177

Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
« Reply #546 on: April 03, 2025, 07:27:47 AM »
Sure. Examples are raw, "UD-matte" and "UD-glossy".

Thanks Makl  :D
I have changed my frame now to UD Glossy
SL8 Custom Green Over Naked Carbon 54CM 6.11kgs RhinosWorkShop Build
2nd Bike in planning not sure what yet!

Sander2177

Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
« Reply #547 on: April 03, 2025, 12:22:10 PM »
Hey all, we have almost finished the build yesterday.
It's not entirely finished, but I have to wait with the handlebar tape until I get to the bike fit guy to set it up properly for me.
Here is the photo of the almost finished bike. It weighs a little over 8kg in size 58 and has quite heavy wheels and tires. With better wheels and tires that I hope to get soonish(tm), I should be able to save around 500-550g with that alone.

Some notes from building the bike. Brakes, we're not that hard to center. It took some finicking, but my friend managed to do it in about 20 minutes or so. Routing cables and hoses were also not that hard, but be careful so you don't drop the metal plate holding the front derailleur in the seat post tube. It was a pain to finagle it back in place.. Otherwise, everything was relatively straightforward. The headtube was finished nicely, and the bearing sat firmly there with no play. Also, the gap under the spacers is not bad after compressing it (see picture).


Can't attach pictures here. It crashes the page, so it's here on google drive - https://drive.google.com/drive/folders/1AEk9xj3Kvf6tfcz9mtWzV21S3gj--7qY?usp=sharing

So what are your thoughts on the Ryet OSPW? Just noticed it on the bike hows it performing as I was planning on for my build
SL8 Custom Green Over Naked Carbon 54CM 6.11kgs RhinosWorkShop Build
2nd Bike in planning not sure what yet!

patliean1

Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
« Reply #548 on: April 03, 2025, 03:56:32 PM »
What was the cost + paint + shipping for a frameset?

I realized tariffs just started lol

Sander2177

Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
« Reply #549 on: April 03, 2025, 04:20:01 PM »
What was the cost + paint + shipping for a frameset?

I realized tariffs just started lol


UD Matte or Gloss Frame and Bars $589 (AS YOU KNOW CUSTOM PAINT COLOUR PRICE VARY UP TO $150USD)
Headset/Thru Axles $20
Shipping $150
paypal 5% $36
Total $795

Or Patrick price with an email to Vivian $0usd Lol
« Last Edit: April 03, 2025, 04:33:03 PM by Sander2177 »
SL8 Custom Green Over Naked Carbon 54CM 6.11kgs RhinosWorkShop Build
2nd Bike in planning not sure what yet!

dovh

Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
« Reply #550 on: Today at 03:56:56 AM »
So what are your thoughts on the Ryet OSPW? Just noticed it on the bike hows it performing as I was planning on for my build

I must say that it's my first time using any OSPW, so besides it looking cool, I'm not sure what benefits it brings. :D The shifter's performance is amazing, and it shifts almost instantly and precisely. It didn't make it any worse, for sure. I would recommend the Ryet OSWP. My friend recommended it to me, and he's also happy with it.

fhill

Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
« Reply #551 on: Today at 04:19:55 AM »
The SL8 battery holder that clamps with the expanding holder via Screw works just fine on the TT X68, have mounted it just now. Sits well in the seatpost! Bike is finally ready. Bit heavier than expected/hoped for. 7.5 kg with Ultegra Di2 11s, Equator 45 with Pirelli PZero TLR 32mm, 11-32 ZTTO cassette, Onirii pedals, Sram Red cranks. Will be a fair bit lighter with the new wheelset and 28mm Conti GP5000 S TR

Sander2177

Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
« Reply #552 on: Today at 04:31:57 AM »
I must say that it's my first time using any OSPW, so besides it looking cool, I'm not sure what benefits it brings. :D The shifter's performance is amazing, and it shifts almost instantly and precisely. It didn't make it any worse, for sure. I would recommend the Ryet OSWP. My friend recommended it to me, and he's also happy with it.

dovh thanks for getting back to me  :D
I have pulled the trigger and ordered this OSPW
I am almost doing a mirror build of my Genuine SL8 as I have the Ceramicspeed OSPW and well this does look very good!
I also have have ordered a Ryet Saddle and some other bits.
Hoping to get this build down to sub 6.8kgs
How the bike riding?
SL8 Custom Green Over Naked Carbon 54CM 6.11kgs RhinosWorkShop Build
2nd Bike in planning not sure what yet!

dovh

Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
« Reply #553 on: Today at 05:52:06 AM »
dovh thanks for getting back to me  :D
I have pulled the trigger and ordered this OSPW
I am almost doing a mirror build of my Genuine SL8 as I have the Ceramicspeed OSPW and well this does look very good!
I also have have ordered a Ryet Saddle and some other bits.
Hoping to get this build down to sub 6.8kgs
How the bike riding?

Nice stuff! It's very similar to what I ended up with. I also got a direct mount but did not use it since I felt it didn't fit on there very well. Compared to the hanger Tantan sent with the bike, the edge around thru axle hole and screw hole were quite a bit higher, and when mounted to the bike, it was sticking out inwards.

As for how the bike rides, I only have about 40km on the bike so far, and it feels really good. It's stiff but not uncomfortable, but then again, I can only compare it to the entry-level aluminum bike I had before. This is miles better in terms of riding comfort and feel in comparison.
Also, I'm about to head out for a 100k ride today, so we'll see how it feels on a longer ride :)

Sander2177

Re: Seraph Bikes Superlight 836g X68 - Alternative to SL8 Fakes?
« Reply #554 on: Today at 06:13:52 AM »
Nice stuff! It's very similar to what I ended up with. I also got a direct mount but did not use it since I felt it didn't fit on there very well. Compared to the hanger Tantan sent with the bike, the edge around thru axle hole and screw hole were quite a bit higher, and when mounted to the bike, it was sticking out inwards.

As for how the bike rides, I only have about 40km on the bike so far, and it feels really good. It's stiff but not uncomfortable, but then again, I can only compare it to the entry-level aluminum bike I had before. This is miles better in terms of riding comfort and feel in comparison.
Also, I'm about to head out for a 100k ride today, so we'll see how it feels on a longer ride :)

Good to know about hanger hmmm well if it does not fit well i can bin it  ;D as well who know when the frame arrives hopefully earlier tan estimates!

Main thing to hear is there are no issue with the frame and yes give feedback on your 100K  :D
Enjoy your ride!
SL8 Custom Green Over Naked Carbon 54CM 6.11kgs RhinosWorkShop Build
2nd Bike in planning not sure what yet!