VeloBuild VB-R-268 frame

[volan]

Everything arrived, groupset, tools, bb, Riro carbon crankset... except the frame and wheels.

Chris was responsive. Initially told me it'll take 2 weeks for the paint, still not done. Will send pictures 2morrow. As for the wheels, should be shipped by this friday, as Peter said. Hoping I'll get this done by the end of this month.

[volan]

Page broken?

[SillyMochi]

Another broken page ...

[SillyMochi]

If at first you don't succeed, try, try again ...

[SillyMochi]

... and again ...

Edit: yay, made it!

[Tilmanstoa5ty]

Yesterday i asked chris if the painting of my frame was finished and didn't get an answer yet. But i just got the automated shipping confirmation mail from velobuild. Chris promised that they will send pictures after painting is done. Hasn't happened yet. As long as i receive my frame without any issues it's not a major problem for me but still worth sharing in my opinion.

Btw. is page 34 of this thread broken for anyone else? Can't access it for some reason but the other pages are working fine.

[SillyMochi]

Yes, Page 35 has been broken - probably by an image in an unsupported file format. I pushed the thread several times to create an new page so we can continue this thread.

[volan]

I ordered on 27.10. Yesterday Chris sent me a picture when I asked. Said it will be shipped tomorrow or saturday. Could've been a bit sooner (he said it would), but it's ok I guess. When I ordered from Carbonda my xc frame, they shipped it really fast (but it was without painting).

Wheels should be shipped today, Peter said. Got a picture. They sit at 1420grams (D50CU-33 T800, cx-ray, inhouse hubs, brass nipples). Would've been under 1400 if I went alu nipples, but I detest them.

Everything else arrived. I went with 105di2, but ordered lighter rotors, riro carbon cranks and ztto 32t cassette (around 230g). So i hope build would land below 8kgs. Will go with xtr pedals atm. And another thing, Chris appologized for delays and sent me par of bottle cages and spare rd hanger. I was just about to buy the cages on ali, good thing I didn't

[Miodu]

Hygge model S or vb 268. Which one of these frames have better quality? Im planning to use r7020 groupset (mech/hyd).

[Cnasta]

I ordered on 27.10. Yesterday Chris sent me a picture when I asked. Said it will be shipped tomorrow or saturday. Could've been a bit sooner (he said it would), but it's ok I guess. When I ordered from Carbonda my xc frame, they shipped it really fast (but it was without painting).

Wheels should be shipped today, Peter said. Got a picture. They sit at 1420grams (D50CU-33 T800, cx-ray, inhouse hubs, brass nipples). Would've been under 1400 if I went alu nipples, but I detest them.

Everything else arrived. I went with 105di2, but ordered lighter rotors, riro carbon cranks and ztto 32t cassette (around 230g). So i hope build would land below 8kgs. Will go with xtr pedals atm. And another thing, Chris appologized for delays and sent me par of bottle cages and spare rd hanger. I was just about to buy the cages on ali, good thing I didn't

Considering the weight of the frame (950 size M) and your quite lightweight wheels, woulnd't sub 7,5kgs be likely? Or is the 105 that much heavier than Ultegra. With your rotors and cassette I can't imagine it making much difference?

[AndyCreese85]

I ordered on 27.10. Yesterday Chris sent me a picture when I asked. Said it will be shipped tomorrow or saturday. Could've been a bit sooner (he said it would), but it's ok I guess. When I ordered from Carbonda my xc frame, they shipped it really fast (but it was without painting).

Wheels should be shipped today, Peter said. Got a picture. They sit at 1420grams (D50CU-33 T800, cx-ray, inhouse hubs, brass nipples). Would've been under 1400 if I went alu nipples, but I detest them.

How much did you pay for your wheels, if you don't mind me asking?

[volan]

Considering the weight of the frame (950 size M) and your quite lightweight wheels, woulnd't sub 7,5kgs be likely? Or is the 105 that much heavier than Ultegra. With your rotors and cassette I can't imagine it making much difference?

Well yes, I hope it will land around 7.6-7.8 with pedals. I will for now use MTB xtr ones that are around 80g heavier than SPD SL counterpart. With my lighter rotors and cassette, and cranks (580g) group set will be lighter than stock Ultegra. But now I just want to build it, and waiting is one thing I hate really bad. And alloy nipples

[volan]

Guys, can I change the integrated handlebars to some other brand if I find VB's not good fit? Can I buy whatever brand from aliex, or do I need to match the spacers beneath stem... I'm not kinda getting this.

[Macedingle]

Well yes, I hope it will land around 7.6-7.8 with pedals. I will for now use MTB xtr ones that are around 80g heavier than SPD SL counterpart. With my lighter rotors and cassette, and cranks (580g) group set will be lighter than stock Ultegra. But now I just want to build it, and waiting is one thing I hate really bad. And alloy nipples

Why the hate of aluminum nips?

[volan]

Why the hate of aluminum nips?

Well, they're brittle, snapped on me couple of times... and don't really need any more reasons. So 20grams of nipples in exchange for a much more reliable future service of the wheel is a no brainer imo.

But I would again ask the question in a post above: Can I put these handlebars on VB268 without any problems?

https://www.aliexpress.com/item/1005007905792275.html?spm=a2g0o.cart.0.0.beab38daJ8Vjfx&mp=1