Quick Pro ER:One

[Swatt]

I have now almost decided to buy the ER:One before the price update on August 1st. A few questions:

1) Is the "Night Dark" color scheme just another way to refer to a raw carbon glossy finish ?
2) Is it possible to run a normal aluminum stem / handlebar combo ? I want to experiment with a couple of stem lenghts before buying an integrated cockpit
3) Is tire clearance confirmed to be 34mm WAM with decent (about 4mm) space around the tires ? Also for the narrow fork ?

Anything else I should be aware of ?

[hubba]

I have now almost decided to buy the ER:One before the price update on August 1st. A few questions:

1) Is the "Night Dark" color scheme just another way to refer to a raw carbon glossy finish ?
2) Is it possible to run a normal aluminum stem / handlebar combo ? I want to experiment with a couple of stem lenghts before buying an integrated cockpit
3) Is tire clearance confirmed to be 34mm WAM with decent (about 4mm) space around the tires ? Also for the narrow fork ?

Anything else I should be aware of ?

1. Yes
2. Yes it's possible others can explain how I haven't tried it. Maybe the stock spacers could match some fsa compatible stem.
3. Yes my rear tire measures 34mm. I have about 5mm of space to the chainstays and 4mm to 8150 di2 fd wire. The narrow fork has plenty of room.

[leogeo]

Would also be interested in hearing how to use a traditional stem/bar combo to test out stem length.

And i just cant decide whether i should go for an ER:One or wait for something with a higher stack (like Tavelo Arden) at the moment i got a canyon ultimate in S (390 Reach, 539 stack, 90mm stem) and i would like to have more reach and more stack…so i would need to have maybe some spacer plus riser cockpit on the Er:One due to its Stack being so low :/

[Swatt]

Would also be interested in hearing how to use a traditional stem/bar combo to test out stem length.

And i just cant decide whether i should go for an ER:One or wait for something with a higher stack (like Tavelo Arden) at the moment i got a canyon ultimate in S (390 Reach, 539 stack, 90mm stem) and i would like to have more reach and more stack…so i would need to have maybe some spacer plus riser cockpit on the Er:One due to its Stack being so low :/

this is an image I found on WW forum. it looks like it is possible to install a normal round spacer on top of the original spacers, so that there is enough room to fit a normal stem. it does not look that bad.
in my case, I would do this while waiting for the HBR20 handlebar from Lightcarbon

[Merry]

Would also be interested in hearing how to use a traditional stem/bar combo to test out stem length.

And i just cant decide whether i should go for an ER:One or wait for something with a higher stack (like Tavelo Arden) at the moment i got a canyon ultimate in S (390 Reach, 539 stack, 90mm stem) and i would like to have more reach and more stack…so i would need to have maybe some spacer plus riser cockpit on the Er:One due to its Stack being so low :/

Yes, you can install a traditional stem / bar combo. This goes for the AR:ONE as well because their steerer tubes are of standard size.

[Bonus79]

Would also be interested in hearing how to use a traditional stem/bar combo to test out stem length.

And i just cant decide whether i should go for an ER:One or wait for something with a higher stack (like Tavelo Arden) at the moment i got a canyon ultimate in S (390 Reach, 539 stack, 90mm stem) and i would like to have more reach and more stack…so i would need to have maybe some spacer plus riser cockpit on the Er:One due to its Stack being so low :/

In my opinion, a riser handlebar would look really good on a frame like the Quick Pro Er:One... it would probably be my first choice. 

[Bonus79]

in my case, I would do this while waiting for the HBR20 handlebar from Lightcarbon

The Tavelo Avro Rise is also really nice... have you happened to consider it yet?

[Bonus79]

I have now almost decided to buy the ER:One before the price update on August 1st. A few questions:

1) Is the "Night Dark" color scheme just another way to refer to a raw carbon glossy finish ?

In my opinion, the Night Dark colorway isn't raw glossy carbon (like the L39ION Champion color), but rather a marbled black with gray veining.

I also really like the L39ION "Panther" finish.

[Bonus79]

In my opinion, the Night Dark colorway isn't raw glossy carbon (like the L39ION Champion color), but rather a marbled black with gray veining.

I also really like the L39ION "Panther" finish.

Looking at the photo uploaded for the frameset (unlike the photo uploaded for the complete bike), I’d say the "Night Dark" color is actually glossy raw carbon.

[Willos]

Does anybody know buy how much the price will rise?

[Swatt]

Does anybody know buy how much the price will rise?

100$, that will become 200$ since also the discount codes will expire.

[gbrnole]

Bikes Finally Done!
Built by Ryan @Rhinosworkshop

Final weight: 6.6kg
Could’ve gone under 6.5kg… but saving parts for another build 

Full Spec
Frameset
• ER ONE – Medium
• Custom paint Ooey custom Purple over raw carbon and sparkle green decals

Cockpit
• Incolor Aerowave integrated bar – 375 × 120 @incolorbikes
• Overfast bar tape 19g

• Extralite expander UltraStar 4

Wheelset Zen
• 65mm front & rear
• 25mm internal / 32.4mm external
• UD gloss finish
• R2 hubs spokes  21F / 24R (2:1) 45T ratchet
• 3.2mm carbon spokes with Hidden spoke nipples

Tyres / Tubes
• Maxxis High Road SL 28mm @maxxisbike
• Ridenow TPU tubes @ridenowtech

Groupset
• Dura-Ace Di2 12-speed

Drivetrain
• DUB crank Cybrei– 170mm
• XCadey Power-S power meter
• Cybrei Meta Aero chainrings 54/38T
• Sixweel EVO steel cassette 11–34T
• Ceramic Speed Alpha Aero RS OSPW
Braking
• Dura-Ace calipers
• Galfer Wave C/L rotors 160 / 140
• Shimano K05Ti-RX pads

Bottom Bracket
• Bikone T47 (DUB)

Finishing Kit
• Ryet 3D printed saddle
• Xpedo Thrust SL Titanium SPDs

Hardware Upgrades
Sixweel/Timaster
• Titanium thru axles
• Titanium UDH hanger
• Titanium thru axles
• Titanium pivot bolt
• Titanium shifter clamps
• Titanium hose bolts

TiNE TECH
• 3d Printed Titanium caliper mount
• 3D Printed Titanium computer mount

how does the ER:One ride vs your SL8?

[alberino]

100$, that will become 200$ since also the discount codes will expire.

Discount codes will not expire, my code does not expire

[Schnitzelmann]

Hey everyone,

little bit of advertising for a friend because he promised to buy me an ice cream in return. 

He designed and 3D-printed a radar mount for my ER:One and is selling them on etsy.

If anyone is interested, here's the link for his etsy shop https://www.etsy.com/de/listing/4536711457/garmin-radar-halterung-fur-quick-pro 
Feel free to check it out!

Shipping is available across Europe.

[alberino]

For the Er One, I use this