Quote from: Nikh on February 14, 2026, 03:35:08 AM
I have 82 inseam at 183cm height.
And I decided to go with size 52 (instead 54)

I wonder, if your drop could be negative at 58.

Can you share a picture of your complete build?

What stem length did you mount?

Can someone please share the link for the 3d printed Garmin holder for the seatpost.

chubv: File for Varia mount is on page 71 in this thread.
If you are interested file for a bit shorter garmin handlebar mount is on page 73.

I dont know how o make those files a bit more visible for everyone who may want them, I was thinking put them on printabels or thingeverse or something, but i dont know if that would be any better.

Quote from: KRoser on February 15, 2026, 02:34:32 PM
chubv: File for Varia mount is on page 71 in this thread.
If you are interested file for a bit shorter garmin handlebar mount is on page 73.

I dont know how o make those files a bit more visible for everyone who may want them, I was thinking put them on printabels or thingeverse or something, but i dont know if that would be any better.

Thanks!

Frame is ready size 50, but no available zero offset seat post as of the moment and its Chinese NewYear so maybe mid march all things are prepared for shipping.

i cut the front brake line a bit short do you think i should redo this? im reluctant to do it since its such a shitty job,  maybe i could get a shop to do it with those zeno quick connect hoses hambini covered recently

did a 100km ride last weekend, the bike itself is nice to ride but im running out of patience with erx

Some insights on zeno q-link, just one person but problems with both versions is still a bit alarming?

https://chinertown.com/index.php/topic,6975.0.html

Tried my bike today. All good. 7.0kg with one side missing bartape. Could easily get to 6.8 with normal tires. These are the TLR RS 35mm at a disappointing 405g each. 35g more then advertised.

kjerts: That looks pretty awesome, nice build. Do you have measure caliper at home, can you measure those prirellis real width?

Kroser: I will measure again after these couple hours of rolling. They where only 34mm right after mounting on the IW26mm XMCS wheels..That's about the same as 32mm GP5000 STR that has been rolling for a while.

I hope this question hasen't already been settled in the past 100 pages of this thread but I am curious if anyone has successfully used a non-proprietary stem/headset on this frame?

i just compared the frame geo to my old super six evo  and just for fun used the cannondale synapse carbon and saw that the geometry is nearly identical. kinda interesting

just fyi

are there any other comparable of the shelf bikes in terms of geo? i want it to fit like a glove and therefore hopefully ride some bikes which specs i could transfer to the lcr018d and build it up.

Bar Tape still missing. Everythig else works fine. Wheels LightCarbon. Size 54.

Edit:

LCR018-D UD 54 black matte finished without logo, storage
Cockpit: HBR17 (380x100mm)
Wheelset: C67DB-BRD28-55C-CS2 Butterfly wave matte finish without logo
Bottle Cages:LightCarbon BC205-UD-M
BB: Rotor T4729 BB - Intern - T47-85.5/86.5/89.5/92-DUB
Sram Force E1 48/36 with Powermeter 10-36t
160mm Brake rotors
Conti GP 5000 32mm
Some AliExpress TPU Tube
Saddle: SD01 LightCarbon
LOOK X-Track Race Carbon Ti Pedal

7,7kg as seen on the foto with pedals and bottle cages
I am 178cm

Quote from: smu86 on February 16, 2026, 07:35:49 AM
i just compared the frame geo to my old super six evo  and just for fun used the cannondale synapse carbon and saw that the geometry is nearly identical. kinda interesting

just fyi

are there any other comparable of the shelf bikes in terms of geo? i want it to fit like a glove and therefore hopefully ride some bikes which specs i could transfer to the lcr018d and build it up.

So it was close to your Synapse? What year?

Quote from: smu86 on February 16, 2026, 07:35:49 AM


are there any other comparable of the shelf bikes in terms of geo? i want it to fit like a glove and therefore hopefully ride some bikes which specs i could transfer to the lcr018d and build it up.

Check out https://geometrygeeks.bike/ you can select a bike and them it will create a list of others with similar geometry.